Table of Contents
Advertisement
Cable or Satellite Control Test
This test will check if your Samsung Smart Remote can control your cable or satellite box.
During the test, point your remote at your cable or satellite box.
Please check the cable connections, and make sure your devices are turned on.
Channel Up
Channel Down
Did the channel change?
Yes
Search for Model Number
We're having trouble finding the right device code. Please enter the model number below
to search for your device.
Search model number
Setup Complete
Now you can control your connected devices with your Samsung Smart Remote.
Done
• This function may not be supported depending on the model or geographical area.
• You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's remote
control without any additional setup.
• Specific external devices connected to the TV may not support the universal remote feature.
• Do not place any obstacles in front of an external device and TV's logo. It may cause signals from the remote
control to be transmitted improperly.
• The TV memorizes both the external device and its connection port (HDMI 1, HDMI 2, etc.).
5. Press the CH button on the remote control according to the
No
6. Follow the instructions on the screen to search for the model
Manufacturer : Unkown
SMT-C7140
SMT-C7140
7. When you have completed all the settings, select Done in the
New Setup
instructions on the screen in order to test whether the TV
and the set-box operate correctly when you press the remote
control buttons.
– If the TV and the set-box operate correctly, select Yes. The
setup is completed. Go to step 7.
– If the TV and the set-box do not operate correctly, select
No. Go to step 6.
number of the set-top box connected to the TV. When the
model number is found, repeat step 5 for the operation test.
following screen:
English - 15
Advertisement
Table of Contents
