Making Coffee With Whole Beans - Cuisinart SS-GB1C Instruction Manual

SETTING THE AUTO ON TIME
When you enter the AUTO ON time set mode, the
previously selected AUTO ON time, or the default
time (12:00) will flash.
1. Press and hold the AUTO ON button until the
display begins to flash. Use the Hour and Minute
buttons as above to program your start-brew time.
2. Press the AUTO ON button once to confirm the
set time and activate the program. The white
light will illuminate, indicating the AUTO ON
function has been activated. LCD will display
the current time.
NOTE: Be sure to set any additional preference
before the AUTO ON cycle begins.
3. AUTO ON brew cycle begins and the LED will
turn off. The Carafe and Brew white indicator
lights will illuminate when the brew cycle begins
at the time you have selected. When the brew cycle
is complete, Brew indicator light will turn blue,
indicating the unit is in Keep Warm mode. Lights
will turn off when the Keep Warm cycle ends.
NOTE: To start brew time at the same time the next day,
simply press and release AUTO ON button once more.
The white AUTO ON light will turn on.
SETTING THE AUTO OFF TIME
Press and hold the AUTO OFF button until the display
is flashing. Use the Hour and Minute buttons as above
to program your coffeemaker to shut off from 0 to 4
hours after brew cycle is finished.
MAKING COFFEE WITH
WHOLE BEANS
Follow instructions in Setting Up Your 12-Cup
Coffeemaker on page 8.
1. Insert charcoal water filter
Follow directions for the preparation and insertion
of the filter on page 8.
2. Fill the water reservoir
Open the reservoir cover and pour in water, using
the water level window indicator to measure the
number of cups desired.
NOTE: Do not exceed the 12-cup line.
Doing so could cause carafe to overflow.
3. Add Beans
Lift the grinder basket lid, using the recess on either
side. Fill the basket with the desired quantity of
beans and replace lid.
NOTE: Use 1 level scoop (1 tablespoon) of whole
beans per cup. For 1 to 4 cups, use 1½ level scoops
per cup. Do not add more than 14 scoops. This
could cause the grinder to malfunction and/or the
coffeemaker to overflow.
4. Insert Coffee Filter
Press the filter basket door release button to open
door and place either a paper filter OR permanent
filter in the basket.
• Paper Filter – Place a basket paper filter in the
basket, making sure the filter is completely open
and touching the side walls and bottom of basket.
• Cuisinart's Commercial-Style Permanent Filter –
Be sure the filter handle is facing away from
the grinder basket, so it does not interfere with
the flow of ground coffee into the filter basket.
NOTE: Some ground coffee may flow into
the carafe.
5. Put Filter Basket in Place and Close Filter Door
6. Before brewing
Make sure the glass carafe is in position on the
heater plate and the top cover is closed. Plug the
cord into an electrical outlet.
NOTE: This coffeemaker is equipped with a safety inter-
lock system, which prevents the unit from operating
if the cover is open or the grinder cover
is left out. If you try to turn the unit on with the cover
open, the carafe indicator will flash
continuously until the missing parts are
installed and you close the lid.
9