Page 1
PTS, Inc. Harris HR-5833 Power Supply Docking Station (PSDS) Manual MODEL #: AS0150-HR-5833 Includes 1 PTS-H-0003J Cable (CAB.AUD.001) Includes 1 5833 DC Power Cable (CAP.DPW.001) Compatible with 1 RF-5833H PA Compatible with 1 AN/PRC-150 Document PTS-HR-5833-2019-4-8 Perkins Technical Services, Inc.
To reduce the risk of electrical shock or fire, DO NOT disassemble the PSDS. Repairs or adjustments to the PSDS must be performed by a qualified technician of PTS. DO NOT work on electrical equipment alone. Be sure another person qualified to administer first aid is present.
Document PTS-HR-5833-2019-4-8 Table of Contents Safety Instructions Power Supply Docking Station (PSDS) Description Specifications Features Physical Dimensions Operational Benefits User Educational Requirements Operation of PSDS with Harris Radios Basic PSDS Set-Up Amplifier / Radio Installation Antenna & Handset Installation, Radio Configuration...
Document PTS-HR-5833-2019-4-8 Power Supply Docking Station (PSDS) Description Perkins Technical Services, Inc. (PTS) has developed a rugged, lightweight, user- friendly power supply docking station (PSDS) for tactical radios. The PSDS provides the capability to operate an AN/PRC-150 radio mounted to a RF-5833H in a continuous and efficient safe manner.
Document PTS-HR-5833-2019-4-8 Specifications Features Docking positions for 1 AN/PRC-150 Docking position for 1 RF-5833H Worldwide frequency input 47 to 440 Hz Worldwide AC voltage input 85 to 260 VAC Fully automatic voltage and frequency selection worldwide, no manual change required...
Lock the amplifier in place by turning the knurled thumbscrews clockwise to seat the amplifier. Attach the PTS-H-0003J Audio Jumper to Audio on the AN/PRC 150 and to Radio on the PSDS. The Handset is attached to the MIC on the PSDS as shown on the photo below.
Antenna & Handset Installation, Radio Configuration To ensure proper operation an HF antenna (not the manpack antenna) must be connected to the amp or you will experience excessive noise. (PTS PUR.ANT.104 HF Antenna with PTS PUR.ANT.103 7m Antenna Mast works well with this system.) Connect the antenna connector to the installed amplifier.
The system is now ready to operate. There is a volume control for the radio network. The PTS-H-0003J audio jumper must be attached as seen earlier. The volume on the AN/PRC-150 must be on at least mid-range for the volume on the HR-5833 to work.
When replacing the filters, wash the filters removed from the PSDS in warm soapy water, rinse thoroughly and allow to air dry. Filters should last indefinitely. The PTS recommended filter cleaning interval is 14 days of continual operation.
PTS will determine if the PSDS needs to be returned for repair/replacement. If PTS determines the PSDS requires return for repair, PTS will assign a Return Material Authorization (RMA) number. The RMA number should be clearly posted on...
PSDS by the user. PTS shall not be obligated to repair or replace a PSDS or transit case if they become damaged through unauthorized maintenance or repair, incorrect operational set-up, abuse or neglect.
Need help?
Do you have a question about the Harris HR-5833 and is the answer not in the manual?
Questions and answers