Filtrete FAP-SC02W Operating Manual page 8

Smart air purifier
Table of Contents

Advertisement

Available languages

Available languages

Control Panel
Console - Model FAP-SC02W: Tower - Model FAP-ST02W
Power Icon
Tap once to turn the device on.
The 'Wi-Fi' states are as follows:
Wi-Fi
- Solid Blue: Wi-Fi connection success
- Blinking Blue: Wi-Fi connection in progress
- Solid Red: Wi-Fi connection fail
- No light: Wi-Fi not enabled
Air Quality Indicators
Your device has both a color-based and
Wi-Fi
numerical index based indoor air quality
indicator. See chart for color/number
definitions and ranges.
Fan – Auto
Wi-Fi
When your device is set to 'Auto' mode, it will automatically adjust fan speed
based on your level of indoor air quality. When poor air is detected, the fan will
automatically increase in speed. When the air has been cleaned, the fan will return
Wi-Fi
back to its lowest speed setting. Simply press the FAN icon to cycle through the
fan speeds to get to Auto mode. We recommend keeping your device on this
mode to maintain optimal indoor air quality.
Wi-Fi
Adjusting Fan Speed
You also have the option to manually set the fan to a speed of your
choice ranging from low (1 light) to high (4 lights) or 'Auto' mode.
Timer
The timer function will turn the Smart Air Purifier OFF after a set amount of time.
For example, 2HR will turn your device of after 2 hours of operation. Press the
TIMER icon until you reach the desired time. Press the TIMER icon again to cycle
Filter Life Tracker
This air purifier uses a smarter way to tracker filter life that is based on usage, air
flow, and air quality.* A new filter will have 100% life and will decrease as you use
your air purifier. The % digits will turn red when there is 10% life remaining and stay
red until there is 0% life remaining and the filter needs to be changed. Once you
have replaced the filter in the air purifier, hold the FILTER icon button for 3 seconds
to reset. See 'Changing Your Filter' section below on instructions on how to
replace your filter.
Lighting Function
Wi-Fi
back on, press the LIGHT icon again.
*Based on exposure to an indoor air quality value of 150 or higher
8
Green = good, 0 - 50
Yellow = fair, 51 - 100
Orange = poor, 101 - 150
Red = very poor, 151 - 200
Purple = severe, 201 - 500

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fap-st02w

Table of Contents