Download Print this page

Advertisement

Quick Links

Technical data:
▸ Radio controlled Clock via DCF frequency
▸ Manual time setting.
▸ Continuous calendar up to year 2099.
▸ Date and weekday display.
▸ Temperature alternatively in ℃ or ℉ .
▸ Time in optional 12/24 hour format.
▸ Weekday display in 7 languages: English,German,Italian,French,Spanish,Netherlands,and Danish
▸ Automatic snooze function (5 minutes).
▸ Thermometer: Indoor measurement ranges: 0°C (32°F) ~ 50°C (122°F)
outdoor measurement ranges: -19.9°C (-3.8°F) ~ 59.9°C (139.8°F)
▸ Display Hi/Lo Outdoor Temperature
▸ Hygrometer: measurement range: 20% ~ 95% RH. Separate display of indoor use.
▸ LED back light display (auto off after 5 seconds).
▸ Battery: 2 x AAA /LR6 (not Included).
LCD SCREEN AND SETTINGS:
Wireless remote sensor (transmitter)
▸ Transmitter frequency: 433.92 MHz.
▸ Range of transmission is up to 60m (200feet).
▸ Iinsert the 2 batteries in to the transmitter, Pay attention to observe the correct polarity.
Initial operation:
▸ Obstacles can severely impair the of the transmission
▸ Protect the transmitter against any direct sunlight penetration
▸ Open the battery compartment on the rear side of the outdoor remote sensor and insert the batteries.
Pay attention to observe the correct polarity. Select the °C/°F display by pushing the button inside the
compartment. Close in the battery compartment
▸ Open the battery compartment on the rear side of the receiver and insert the batteries. Pay attention
to observe the correct polarity. Close the battery compartment.
SP54 Manual

Advertisement

loading

Summary of Contents for Centrum Elektroniki SP54

  • Page 1 SP54 Manual Technical data: ▸ Radio controlled Clock via DCF frequency ▸ Manual time setting. ▸ Continuous calendar up to year 2099. ▸ Date and weekday display. ▸ Temperature alternatively in ℃ or ℉ . ▸ Time in optional 12/24 hour format.
  • Page 2 SP54 Manual ▸ When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, and you will hear a beep tone, and detect indoor temperature & humidity. ▸ The receiver will now start to make a connection to the outdoor remote sensor. This operation takes about 3 minutes and is displayed by a flashing reception RF antenna symbol in the “OUTDOOR”...
  • Page 3 SP54 Manual signal is heard. Automatic SNOOZE function: ▸ To activate the automatic snooze function: While the alarm is sounding, press the “SNOOZE/LIGHT” button to activate the snooze function. When the snooze function is activated, the “Zz” symbol appears in the display.
  • Page 4 SP54 Manual...