Table of Contents
Advertisement
en Troubleshooting
Fault
Water is leaking from
the appliance.
The laundry is too
damp.
40
Cause and troubleshooting
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 14
Unsuitable programme for the type of fabric.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 25
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 25.
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable dryness level set.
→ "Changing the dryness level", Page 24.
▶
Drying target not adjusted.
→ "Adjusting the dryness level", Page 24.
▶
Load too small.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 25
Moisture sensor dirty.
→ "Cleaning the moisture sensor", Page 36.
▶
The drying process is interrupted and the condensa-
tion tank has been filled.
→ "Emptying the condensation container", Page 31.
1.
→ "Inserting the condensation container", Page 31.
2.
→ "Starting the programme", Page 28.
3.
Advertisement
Table of Contents
