DèLonghi DNSL 460 NCM Installation & User's Instructions
  1. Manuals
  2. Brands
  3. DèLonghi Manuals
  4. Hob
  5. DNSL 460 NCM
  6. Installation & user's instructions
DèLonghi DNSL 460 NCM Installation & User's Instructions

DèLonghi DNSL 460 NCM Installation & User's Instructions

Built-in cooking hob
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
D E ' LO N G H I
C OOKIN G
INSTALLATION & USER INSTRUCTIONS
D NS L 46 0 N CM
BUILT-IN COOKING HOB
GB
IE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DNSL 460 NCM and is the answer not in the manual?

Questions and answers

Related Manuals for DèLonghi DNSL 460 NCM

Summary of Contents for DèLonghi DNSL 460 NCM

  • Page 1 D E ’ LO N G H I C OOKIN G INSTALLATION & USER INSTRUCTIONS D NS L 46 0 N CM BUILT-IN COOKING HOB...

  • Page 2: Table Of Contents

    CONTENTS Page Number Introduction ..........Important Safeguards &...

  • Page 3: Introduction

    Dear Customer, Thank you for purchasing the DeLonghi DNSL 460 NCM built-in cooking hob. The safety precautions and recommendations listed below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance.

  • Page 4: Important Safeguards & Recommendations

    IMPORTANT SAFETY PRECAUTIONS AND RECOMMENDATIONS IMPORTANT: This appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domestic application and therefore should not be used in a commercial environment. The appliance guarantee will be void if the appliance is used within a non domestic environment i.e.
  • Page 5 manufacturer declines all responsibility for any inconvenience resulting from the inobservance of this condition. • CAUTION: this appIiance must only be installed in a permanently ventilated room in compliance with the applicable regulations. • Do not carry out cleaning or maintenance operations on the appliance without having previously disconnected it from the electric power supply.
  • Page 6 • WARNING: During use the appliance and its accessible parts become hot; they remain hot for some time after use. Care should be taken to avoid touching heating elements on – the hob. To avoid burns and scalds, young children should be kept –...
  • Page 7 If the appliance is not fitted with a supply cord and a plug, or with • other means for disconnection from the supply mains having a contact separation in all poles that provide full disconnection under overvoltage category III conditions, means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.

  • Page 8: Advice For The Installer

    Advice for the installer...
  • Page 9 IMPORTANT : • The appliance is designed and approved for domestic use only and should not be installed in a commercial, semi commercial or communal environment. Your product will not be guaranteed if installed in any of the above environments and could affect any third party or public liability insurances you may have.

  • Page 10: Installation

    1 - INSTALLATION TECHNICAL INFORMATION FOR THE INSTALLER In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in fig. 1.1a or 1.1b has to be made, bearing in mind the following: • A 40mm ventilation gap must be provided between the bottom of the appliance and any cabinetry, draw unit, thermal protection barrier or appliance.
  • Page 11 STANDARD INSTALLATION X=8 mm X=4 mm Fig. 1.1a FLUSH INSTALLATION (MODELS WITHOUT METAL TRIM/S AND X=4 ONLY) If you wish to install the hob flush with the work surface, it is neccessary to execute/carry out a miling in the hole of the cut-out as indicated in figs. 1.1b. X=4 mm Fig.
  • Page 12 Measures (mm) Description C (**) (***) (***) (***) (***) 50 (1) 54 (2) 60cm wide models 600 510 or 60 (2) for flush installation For models with metal trim/s add 4mm to the measurement for each trim. Example: front metal trim= B+4mm. (**) from the top of countertop to bottom of cooktop.
  • Page 13 FASTENING THE COOKTOP Each cooktop is provided with an installation kit including brackets and screws for fastening the cooktop to benches from 30 to 40 mm thick. The kit includes two “F” type brackets (for the front of the cooktop), two “R” type brackets (for the rear of the cooktop) and four self-threading screws “S”.
  • Page 14 PROVISION FOR VENTILATION • The appliance should be installed into a room or space with an air supply in accordance with the current version of BS 5440-2: 2000. • For rooms with a volume of less than 5m - permanent ventilation of 100 cm free area must be provided.

  • Page 15: Gas Installation

    2 - GAS INSTALLATION GAS INSTALLATION REQUIREMENTS Important! • The walls adjacent to the cooker must be of heat-resistant material. • Before installation, make sure that the local distribution conditions (gas type and pressure) and the adjustment of this appliance are compatible. The appliance adjustment conditions are given on the plate or the label.
  • Page 16 GAS CONNECTION Cat: 2H 3+ Installation to Natural Gas Installation to Natural Gas must conform to the Code of Practice, etc. The supply pressure for Natural Gas is 20 mbar. The installation must conform to the relevant British/European Standards. Installation to LP Gas When operating on Butane gas a supply pressure of 28-30 mbar is required.
  • Page 17 The fitting (fig. 2.1) is made up of: 1/2" BSPP (G) parallel 1/2" BSPP (G) parallel – 1 nut “A” (ISO 228-1) male (ISO 228-1) female – 1 elbow fitting “C” – gasket “F” Connection to the Gas Supply Be careful when flexible pipes are used –...
  • Page 18 GAS MAINTENANCE TABLE FOR THE CHOICE OF THE INJECTORS G30/G31 Cat:II 2H 3+ 28-30/37 mbar 20 mbar Nominal Reduced Ø injector Ø injector BURNERS Power Power [1/100 mm] [1/100 mm] [kW] [kW] Auxiliary (A) 1,00 0,40 Semi-rapid (SR) 1,75 0,45 Double-ring compact 3,50 1,50...
  • Page 19 REPLACEMENT OF THE INJECTORS Auxiliary and If the injectors are not supplied they can semi-rapid be obtained from the “Service Centre”. burner Select the injectors to be replaced according to the “TABLE FOR THE CHOICE OF THE INJECTORS”. nozzle diameters, expressed hundredths of a millimeter, are marked on the body of each injector.

  • Page 20: Electrical Installation

    3 - ELECTRICAL INSTALLATION IMPORTANT: The appliance must be installed in accordance with the manufacturer’s instructions. Incorrect installation, for which the manufacturer accepts no responsibility, may cause damage to persons, animals or property. The connection of the appliance to earth is mandatory. The manufacturer declines all responsibility for any inconvenience resulting from the inobservance of this condition.
  • Page 21 ELECTRICAL FEEDER CABLE REPLACEMENT WARNING: If the power supply cable is damaged, it must be replaced only by an authorized service agent in order to avoid a hazard. To connect the supply cable: Unhook the terminal board cover by inserting a screwdriver into the two hooks “A” (fig. •...

  • Page 23: Advice For The User

    Advice for the user...

  • Page 24: Features And Technical Data

    1 - FEATURES AND TECHNICAL DATA Fig. 1.1 8 7 6 5 GAS BURNERS Auxiliary (A) 1,00 kW Semirapid (SR) 1,75 kW Semirapid (SR) 1,75 kW Double-ring compact (DRC) 3,50 kW CONTROLS DESCRIPTION Burner control knob (1) Burner control knob (2) Burner control knob (3) Burner control knob (4) NOTES:...

  • Page 25: How To Use The Cooktop

    2 - HOW TO USE THE COOKTOP GAS BURNERS NOTE: Gas flow to the burners is adjusted by The knob and symbols may vary. turning the knobs (illustrated in fig. 2.1a or 2.1b) which control the safety valves. Turning the knob, so that the indicator line points to the symbols printed on the panel, achieves the following functions: –...
  • Page 26 LIGHTING THE BURNERS DEEP FAT FRYING For safety purposes when deep fat frying, ignite burner, following do not fill the pan more than one third full instructions are to be followed: of oil. Press in the corresponding knob and DO NOT cover the pan with a lid and DO turn counter-clockwise (fig.
  • Page 27 CHOICE OF THE BURNER On the control panel, near every knob there is a diagram that indicates which burner is controlled by that knob. The suitable burner must be chosen according to the diameter and the capacity used. As an indication, the burners and the pots must be used in the following way: DIAMETERS OF PANS WHICH MAY BE USED ON THE BURNERS BURNERS MINIMUM...
  • Page 28 WOK STAND (OPTIONAL) (figs. 2.4a - 2.4b) Only flat bottom pans of the correct size are to be placed on the pan support above the double-ring compact burner. When using a WOK, the supplied wok stand must be placed onto the pan stand to avoid any faulty operation of the double-ring compact burner.
  • Page 29 WRONG CORRECT Fig. 2.4a Fig. 2.4b...
  • Page 30 Fig. 2.5...

  • Page 31: Cleaning & Maintenance

    3 - CLEANING AND MAINTENANCE GENERAL ADVICE Before you begin cleaning, you must ensure that the appliance is switched off • and disconnected from the electrical power supply. • Important: The use of suitable protective clothing/gloves is recommended when handling or cleaning of this appliance. Under no circumstances should any external covers be removed for servicing or •...
  • Page 32 ENAMELLED SURFACES All the enamelled parts must be cleaned with a sponge and soapy water only or other non- abrasive products. Dry preferably with a microfibre or soft cloth. If acid substances such as lemon juice, tomato conserve, vinegar etc. are left on the enamel for a long time they will etch it, making it opaque.
  • Page 33 BURNERS These parts can be removed and cleaned with appropriate products. Warning! Not dishwasher safe. After cleaning, the burners and their flame spreaders must be well dried and correctly replaced. It is very important to check that the burner flame spreader and the cap have been correctly positioned.
  • Page 34 Fig. 3.3 Fig. 3.2 Fig. 3.4...
  • Page 35 Fig. 3.5 Fig. 3.6...
  • Page 36 PAN SUPPORTS These parts must be cleaned using a sponge and soapy water or other suitable non- abrasive products. Dry with a soft cloth. Warning! Not dishwasher safe. After cleaning, they must be repositioned properly (fig. 3.7). It is very important to check that the pan supports have been correctly positioned. Failure to do so can cause serious problems.
  • Page 37 4 - GUARANTEE Your new “De’Longhi” product comes with 12-month guarantee covering all parts and labour. If your appliance proves to be defective as a result of faulty materials or workmanship during the guarantee period, these parts will be repaired or replaced free of charge. AFTER SALES SERVICE Should you require service, spares or product information and advice: •...
  • Page 40 Descri pt ion s an d illu st ra tion s in this book l et ar e given as simpl y indicati ve. T he m an uf a ct u r er re s erv es t he right , c onsidering the charact erist ics of t he models d escr ib ed h e re , at any time and wit ho ut notice, t o make even tual nece ssary modifi cat io ns f or t h e ir c o ns truc t ion or f or c om mercial ne eds.

Table of Contents