Familiarising Yourself With Your Appliance; Before Using For The First Time; Basic Operation; Home Connect - Siemens LR97CAQ50B User Manual And Installation Instructiions

5 Familiarising yourself with your appliance
5.1 Controls
You can use the controls to configure all functions of
your appliance and to obtain information about the op-
erating status.
Tip: Align the remote control as precisely as possible
to the infrared receiver for the LED display.
Switch the appliance on or off
Switching automatic mode
Increase the fan setting
Decrease the fan setting
Switch the lighting on or off
Reduce the brightness
Increase the brightness
1
Depending on the appliance specifications
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Note: When using it in circulating-air mode, you require
additional accessories.
7 Basic operation
7.1 Switching on the appliance
Requirement: Align the remote control as precisely as
possible to the infrared receiver for the LED display.
▶ Press to switch on the appliance.
a The appliance starts at fan setting 2.
a The LED for the set fan setting lights up in the LED
display.
1
on or off
Familiarising yourself with your appliance en
Switch the fan run-on on or off
Home Connect Establishing a connection
Reset the filter saturation indicator
1
Depending on the appliance specifications
5.2 LED display
Die LED-Anzeige zeigt eingestellte Werte und Funk-
tionen.
1 2 3 4 5
Fan setting 1/grease filter saturation display
1
Fan setting 2/odour filter saturation indicator
2
Fan setting 3
3
Intensive mode 1
4
Intensive mode 2
5
Automatic mode
6
ilation
Home Connect
7
Infrared receiver
8
1
Depending on the appliance specifications
▶ When using it in circulating-air mode, set the operat-
ing mode.
7.2 Switching off the appliance
Switch the appliance off when you are not using it.
▶
Press to switch the appliance off.
a The appliance switches off. Any functions currently
in progress are cancelled.
6 7 8
1
/fan run-on time/interval vent-
7