Connecting LaN
LaN connection
Connect the router or switch to the monitor.
NoTE
•
The Lan cable is sold separately.
•
The following Lan cable type can be used: standard: IEEE 802.3 ETHERnET
•
Connect the Lan cable and the peripheral devices to use the monitor.
- In order to use Ethernet in the PC, the usB-C cable must be connected to the PC.
•
The monitor and PC must be connected with a usB-C cable or usB-B cable to use wired Lan.
14
Connecting peripherals
uSb Device connection
The usB port on the product functions as a usB hub.
NoTE
•
It is recommended you install all windows updates to keep your windows up-to-date before connecting to the
product for use.
•
Peripheral devices are sold separately.
•
a keyboard, mouse, or usB device can be connected to the usB port.
•
The charging speed may vary depending on the device.
•
To use the monitor' s downstream usB port, connection to the host PC must be established by using a usB C-C
or usB C-a cable for the usB-C port, or a usB B-a cable for the usB-B port.
•
when the usB C-C cable is connected between upstream port of monitor and Host PC, the Downstream port of
monitor support usB 2.0 device.
•
when the usB C-a cable is connected between upstream port of monitor and Host PC, the Downstream port of
monitor support usB 3.0 device.
However, Host PC & usB C-a cable must support usB 3.0 function.
CauTIoN
Cautions when using a usB Device
•
a usB device with an automatic recognition program installed, or that uses its own driver, may not be
recognized.
•
some usB devices may not be supported or may not work properly.
•
It is recommended to use a usB hub or hard disk drive with power supplied. (If the power supply is not
adequate, the usB device may not be recognized properly.)