Directions For Use; Juicing - Omega COLD PRESS 365 H3000RED Manual

DIRECTIONS FOR USE

Before the first use of product, please completely clean the components contacting ingredients.
(See Maintenance)
For Juicing:
This product will not start working until all the parts and components are correctly assembled.
1
2
3
4
5
7
BUTTON OPERATION INSTRUCTIONS:
• FORWARD (ON) BUTTON: NORMAL USE
• "0" STOP
• REVERSE (REV) BUTTON: USE WHEN PULP BLOCKS OUTPUT OR
THE MOTOR IS LOCKED. AUGER WILL BEGIN TO REVERSE. AFTER
THIS BUTTON IS RELEASED, THE AUGER WILL STOP REVERSING.
IF THE "FORWARD" (ON) BUTTON IS PRESSED AGAIN, THE AUGER
WILL RESUME NORMAL PROCESS.
1. PULL THE LOCK LATCH UP.
2. PLACE THE CENTER POSITION OF THE DRUM INTO THE
OPENING IN THE CENTER OF THE FRONT OF THE BODY.
3. HOLD THE DRUM & FEED CHUTE WITH ONE HAND AND
PRESS THE LOCK LATCH DOWN WITH THE OTHER HAND
4. THE DRUM & FEED CHUTE WILL BE AFFIXED TO
THE BODY.
ALIGN THE SCREW END OF THE AUGER WITH THE HOLE ON
THE BODY OF THE MACHINE. PUSH STRAIGHT INTO THE
DRUM AND INTO THE MACHINE.
IN CASE OF MISALIGNMENT, ROTATE THE AUGER SLIGHTLY.
1. ALIGN THE WIDER END OF THE JUICE STRAINER WITH
DRUM OPENING.
2. ALIGN THE THREE BUCKLES ON THE JUICING SCREEN
WITH THE THREE SLOTS ON THE DRUM.
ALIGN THE THREE BUCKLES ON THE ENDCAP AND THE THREE
BUCKLES ON THE DRUM. LOCK THE ENDCAP BY TURNING
COUNTER-CLOCKWISE.
PLACE THE JUICE CONTAINER UNDER THE JUICE SPOUT.