Opus OPL-M40 - Flash Unit Guide

Kit Contents

Handling Precautions

• Turn off the power and unplug the power cord if the flash will not be used for a few days.
• For peak performance and longer life, the unit should be fired several times every month.
• Do not use the unit if it has been in contact with moisture or flammable vapor and / or flammable material.
• Do not use the flash if it appears to be damaged.
• Never attempt to service the unit yourself. Severe shock and / or burns could result.
• Only certified technicians are authorized to service this unit.
• Before plugging in the unit, check that all the switches are in the "OFF" position.

Control Panel Guide

Using the OPL-M40

The OPL-M40 can be screwed into any standard AC light socket. It can also be used with the Opus OPL-SA02 light socket (see Available Accessories).
There are several ways to trigger the Opus OPL-M40 moonlight

Sync Socket:
The sync socket is a standard ⅛" jack and is used for connecting the OPL-M40 to a camera with the sync cord. Please refer to your camera's instruction manual for sync cord operation.

Photocell:
The OPL-M40 has a built-in photocell, enabling the unit to be triggered by another flash source.

Flash Test Fire Button:
The flash test fire button manually triggers the flash without using a camera. This is useful for testing the flash and checking exposures.

Specifications

Due to our policy of constant product improvement, we reserve the right to change equipment specifications and operating procedures without further notice.

Available Accessories

www.OpusProPhoto.com
Have some feedback? Kindly contact us at info@OpusProPhoto.com
You can also contact us at 416.745.2622, 9 a.m. to 5 p.m. EST or at customerservice@OpusProPhoto.com.