SPECIFICATIONS
Model | AF-CT6003 |
Dimension | 302 x 356 x 328mm / 11.9 x 14.0 x 12.9inches |
Capacity | 6.0 qt/5.7L |
Input | 120V-, 60Hz, 1350W |
Net Weight | 5.3kg/11.71bs |
WiFi & App | Supported |
GETTING STARTED
- Remove all the packaging materials, stickers and labels from the air fryer.
- Draw out the Fryer Basket; wash the Fryer Basket and the Crisper Plate in warm, soapy water or in a dishwasher, then rinse and dry thoroughly.
![Ecozy - AF-CT600B - Getting Started - Step 1 - Wash the Fryer Basket Getting Started - Step 1 - Wash the Fryer Basket]()
- Place the Crisper Plate into the Fryer Basket, then push back the Fryer Basket into the air fryer.
![Ecozy - AF-CT600B - Getting Started - Step 2 Getting Started - Step 2]()
- Place the air fryer on a stable, level and heat-resistant surface. Keep it away from places that can be damaged by steam.
Note: Leave at least 10ст of space behind and above the аir fryer. Leave enough room for removing the basket.
![Ecozy - AF-CT600B - Getting Started - Step 3 Getting Started - Step 3]()
USING YOUR AIR FRYER
POWERING ON
Step 1: Plug the air fryer into an outlet, and you will hear a beep. The power button will light up at low brightness; while all the other button indicators will flash once, then be off.
![Ecozy - AF-CT600B - Using - Powering on - Step 1 Using - Powering on - Step 1]()
Step 2: Press the
button to turn on the air fryer.
- The
icon will increase to high brightness.
and
icons will light up at high brightness, and the other button indicators will light up at low brightness. - The LED Display will show 360°F and 15 Min alternately every 3 seconds.
![Ecozy - AF-CT600B - Using - Powering on - Step 2 Using - Powering on - Step 2]()
PREHEATING
Step 1: Press the Preheat button, and the indicator will start flashing.
![Ecozy - AF-CT600B - Using - Preheating - Step 1 Using - Preheating - Step 1]()
Step 2: The default preheat temperature is 400°F; the default preheat time is 5MlN. Customize the temperature and time according to your needs (see next sections).
Notes:
- For the first use, we strongly recommend selecting the Preheat program to preheat your air fryer for 30 min utes in a ventilated space to remove possible strange odors.
- For daily use, we recommend preheating your air fryer for 5-10 minutes before each cooking.
Step 3: Press the Control Knob to confirm your selection and start preheating, then the indicator light of Preheat will turn solid on.
![Ecozy - AF-CT600B - Using - Preheating - Step 2 Using - Preheating - Step 2]()
Step 4: When finishing preheating, the air fryer will beep 5 times and then enter standby mode,
SELECTING PROGRAMS
After preheating, you can select the program you want from Vegetable/Chicken/Beef/Seafood/ Dessert/French Fries/Defrost/Toast/Reheat/Dehydrate/My Recipe and refer to the above steps for cooking.
![Ecozy - AF-CT600B - Using - Selecting Programs Using - Selecting Programs]()
Please refer to the following chart for the default temperature and time of the 12 preset programs.
Program | Default Temperature | Default Time |
Vegetable | 300°F | 8MIN |
Chicken | 400°F | 20MIN |
Beef | 360°F | 20MIN |
Seafood | 370°F | 6MIN |
Dessert | 300°F | 20MIN |
French Fries | 380°F | 15MIN |
Defrost | 150°F | 10MIN |
Toast | 320°F | 8MIN |
Reheat | 320°F | 5MIN |
Dehydrate | 160°F | 360MIN |
My Recipe | 360°F | 15MIN |
Preheat | 400°F | 5MIN |
Tip:
After connecting the air fryer to the EcozyHome App, you can pick a specific online recipe, then the default temperature аnd time will be changed accordingly.
SETTING TEMPERATURE
- After powering on and selecting the program, tap
on the panel to start setting the temperature for cooki ng.
The temperature value on the LED Display will start flashing.
![Ecozy - AF-CT600B - Setting Temperature - Step 1 Setting Temperature - Step 1]()
- Rotate the Control Knob clockwise to increase the temperature.
Rotate the Control Knob counterclockwise to decrease the temperature.
![Ecozy - AF-CT600B - Setting Temperature - Step 2 Setting Temperature - Step 2]()
Tip:
Temperature can be adjusted in the range cf 100-160°F (for Dehydrate) or 100°F 400°F (for other programs), being increased or decreased by 5°F far every rotation.
SETTING TIME
- After powering on and selecting the program, tap
on the panel to start setting the time for cooking.
The time value on the LED Display will start flashing.
![Ecozy - AF-CT600B - Setting Time - Step 1 Setting Time - Step 1]()
- Rotate the Control Knob clockwise to increase the time.
Rotate the Control Knob counterclockwise ta decrease the time.
![Ecozy - AF-CT600B - Setting Time - Step 2 Setting Time - Step 2]()
Tip:
Time can be adjusted in the range of 1 MIN-360 MIN (for Dehydrate) ог 1 MIN-60 MIN (for other programs), being increased ог decreased by 1MIN for every rotation.
PAUSING/RESUMING
TO pause cooking, press the Control Knob on the Control Panel, or simply draw out the fryer basket at any time during cooking,
![Ecozy - AF-CT600B - Pausing/Resuming - Step 1 Pausing/Resuming - Step 1]()
To resume cooking, press the Control Knob again within 10 minutes, or push the basket back into place within 10 minutes. The air fryer will continue to work with the same settings as before the pause.
![Ecozy - AF-CT600B - Pausing/Resuming - Step 2 Pausing/Resuming - Step 2]()
POWERING OFF
- Option 1
When finishing cooking, the air fryer will beep 5 times and then enter standby mode. In standby mode, the
,
and
buttons will light up at high brightness, and other buttons will light up at low brightness.
After a period of time in standby mode without any operation, the air fryer will automatically power off. - Option 2
You can also manually press the Power On/Off button to turn off the air fryer.
![Ecozy - AF-CT600B - Using - Powering Off Using - Powering Off]()
OVERHEAT PROTECTION
When the temperature of the air fryer reaches 428°F, the thermal protector inside the air fryer will automatically power off and the fryer will stop working. Please contact our after-sales service in time.
COOKING TIPS
- Ensure that the height of the food does not exceed the height of the fryer basket.
![]()
- Do not put paper or plastic containers that are not heat-resistant into the air fryer.
![]()
- It is recommended to check the food through the window during the cooking process аnd pull out the basket to shake the food if necessary.
![]()
- For more tips and directions, check out online recipes in the EcozyHome App or download the recipes through the QR code in the user manual.
OPERATING VIA APP
APP DOWNLOADING AND INSTALLATION
For Android
![]()
APP REGISTRATION AND LOGIN
Launch the App, register an account with your mobile phone number or a valid email address at your first use, then log in.
Note:
For a successful connection, please allow the App to use your WLAN & Cellular Data when running it.
CONNECTION MODE
![]()
For the air fryer:
- Make sure the air fryer has been plugged into a socket and powered on,
For WiFi network:
- Before connecting, please turn on location service/CPS on your phone and grant all the permissions required by the App.
- Make sure your mobile device is connected to a 2.4GHz WiFi.
- Make sure you've entered the correct WiFi name and password when connecting.
- Make sure the air fryer, your phone and your router are close enough when connecting.
WiFi Button Indicator
Flashing | Ready for WiFi Connection |
Solid | WiFi Connected |
Auto Search
- Long press the WiFi Button on the air fryer for about 3 seconds and release your finger until you hear a beep.
Make sure the WiFi button indicator is flashing. - Launch the App, and tap Add Device.
- Tap Air Fryer, then select the model.
- Tap Next on the Auto Search page.
- Turn on the Bluetooth and location access on your mobile device.
- Tap Search.
- Select the device model and tap Connect.
- Select WiFi and enter the correct password; tap Confirm.
- Connecting.
- Connected. The WiFi button indicator will turn solid on.
Add Manually
- Long press the WiFi Button on the air fryer for about 3 seconds and release your finger until you hear a beep.
Make Sure the WiFi button indicator is flashing. - Launch the App, and tap Add Device.
- Tap Air Fryer, then select the model.
- Tap Add Manually, then tap Next.
- Select WiFi and enter the correct password.
- Tap Go to Settings.
- Tap WLAN.
- Connect to the airfryers AP hotspot ECOZY-XXXX,
- Go back to the App and tap Next.
- Connecting,
- Connected, The WiFi button indicator will turn solid on,
QUICK RECIPE
Step 1: Launch the App, then tap Recipes to browse all the recipes,
Step 2: Select one of the recipes to enter the details page, and tap Set as the Quick Recipe to set it as a quick recipe,
Step 3: Press the My Recipe button on the Control Panel of the air fryer, and the default temperature & time of the quick recipe you picked will be displayed promptly and automatically,
Step 4: Press the Control Knob to start cooking.
Note:
Only one recipe can be set as a quick recipe at a time,
COOKING COUNTDOWN TIMER
Step 1: Launch the App.
Step 2: Select a preset program from Vegetable/Chicken/Beef/Seafood/Dessert/French Fries/ Defrost/ Toast/Reheat/Dehydrate/My Recipe/Preheat, or go to Recipes and select one of the recipes to enter the details page.
Step 3: Tap Timer.
Step 4: Set the countdown timer from 1 MIN to 360 MIN.
Step 5: Tap Confirm.
Step 6: It will automatically jump to the countdown page and start the countdown. When the time's up, the air fryer will start working automatically.
Tip:
During countdown, you can tаp the temperature and time to customize them а5 needed; tap Cancel to cancel the timer; tap Cook to start cooking immediately.
MAINTENANCE AND CARE
![]()
- Before cleaning, unplug your air fryer and wait until it cools completely. You may draw out the fryer basket for faster cooling.
![]()
- Do not immerse the whole air fryer in water or any other liquid.
![]()
- After cleaning, always remember to dry all the parts.
![]()
EXTERIOR
Use a clean and damp cloth to wipe the exterior of the air fryer.
![]()
FRYER BASKET AND CRISPER PLATE
Dishwasher safe. Do not use metal utensils or abrasive cleaning materials to clean the non-stick coating.
![]()
STUBBORN FOOD RESIDUE
Clean the food residue stuck on the basket and the plate by soaking in warm and soapy water.
![]()
TROUBLESHOOTING GUIDE
Q1. The air fryer does not turn on.
- Check if you have plugged in the air fryer.
- Push the basket securely into the air fryer.
Q2. The LED Display does not show anything.
- Check if you have plugged in the air fryer.
- Check if you have powered on the air fryer.
- Check if the LED display screen is broken.
Q3. Food is not completely cooked.
- Check if you have put too much food on the Crisper Plate. The foods will be undercooked if the basket is overfilled.
- Increase the cooking temperature or time.
Q4. The Fryer Basket cannot be pushed into the fryer securely.
- Check if you have put too much food on the Crisper Plate. Make sure the height of the food does not exceed the height of the fryer.
- Check if the edges of the air fryer are deformed. Contact us to deal with such issues.
Q5. White smoke comes out of the air fryer.
- Cooking high-fat food will cause fat to drip to the bottom of the basket, which is normal. To avoid excess smoke While cooking, pour out fat drippings after every cooking and clean the air fryer according to the instructions.
Q6. The LED Display shows E1.
- There is an open circuit of the temperature sensor. Contact us to deal with such issue.
Q7. The LED Display shows E2.
- There is a short circuit of the temperature sensor. Contact us to deal with such issue.
Q8. The LED Display shows E3.
- The air fryer gets overheated. Draw out the air fryer and wait until it cools down. Contact us if issue like this occurs again.
Q9. How to remove the strange odor of the air fryer?
- The air fryer may have a strange odor when it's used for the first time. There is no need for concern. The material used in this fryer is non-toxic and harmless, and has passed the relevant food safety inspection.
- When using the air fryer for the first time, please clean the air fryer first, then select the Preheat program to preheat the air fryer for at least 30 minutes to remove the strange odor.
- If you are particularly sensitive to the odor, you can put orange peel, grapefruit peel or tea leaves into the Fryer Basket, then select the Preheat program to preheat the air fryer for at least 30 minutes to remove the strange odor.
Q 10. Why can not the air fryer connect to WiFi?
- Before connecting, please turn on location service/GPS on your phone and grant all the permissions required by the App.
- Please check the network connection status before connection and make sure you have paid your network fee in timer.
- Make sure your mobile device is connected to a 2.4GHz WiFi, If your router is a dual-band router, please select the 2.4GHz network.
- Make sure you've entered the correct WiFi name and password when connecting.
- Avoid using an emoji or special characters or symbols in your WiFi name and password.
- It is not recommended to use the public WiFi networks, such as the WiFi network of apartment complex, subway, airport, hotel.
- Do not use VPN or proxy servers for your WiFi network.
- When connecting, make sure the air fryer, your phone and your router are close enough.
- This air fryer does not support networks requiring authentication via web pages.
- This air fryer does not support routers with hidden WiFi names. The WiFi name must be visible and recognizable by the phone.
- It is recommended to use a combination of English letters and numbers for the WiFi name and password, not to use special characters to avoid failures caused by different input methods.
Frequency range | 2402-2472MHz |
Transmit power(EIRP) | ≤20dBm |
Thank you for choosing our product.
If you have any questions, concerns, ог need any help, please contact us at support@ecozy.com
or call us via hotline (443) 991-8777 (UTC 14:00-22:00, Monday to Friday)
Please scan the QR codes below to download the recipes.
![]()
![]()
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Need help?
Do you have a question about the AF-CT600B and is the answer not in the manual?
Questions and answers