Advertisement
PRODUCT TECHNICAL PARAMETERS
JF260 air purifier | X 1 |
Composite filter | X 2 (pre-installed) |
Power adaptor | X 1 (DC 24V) |
User manual | X 1 |
PRODUCT TECHNICAL PARAMETERS
Product name | Air Purifier | Model | JF260 |
Power Adapter (Input) | 100-240V~ 50/60Hz | Product size | 8.66x 8.66 x 14.41 in 22 x 22 x 36.6 cm |
Power Adapter (Output) | 24V1.5A | Package Size | 11.42 x 10.24 x 16.06 in 29 x 26 x 40.8 cm |
Rated Power | 32W | N.W. | 6.6lb/3.0kg |
CADR (Clean Air Delivery Rate) | 153CFM (260m³/h) | G.W. | 8.6lb/3.9kg |
Noise Level | 23-54dB | Standby Power | < 0.5W |
Operating Conditions | Temperature: 14℉-104℉/-10 ℃-40 ℃ Humidity: 20%-95% RH | Filter life | 3000H |
Room Area Served | 238ft (5 Times/h)2 |
Read the instructions carefully and follow the following safety precautions when using this product!
Prohibitory sign | Any content with this logo must be avoided to prevent damages to the product and personal safety hazard. |
Warning sign | All contents with this logo should be operated in strict accordance with the requirements, to prevent damages to the product or personal safety hazard. |
Caution sign | Any content with this logo requires users' attention, otherwise it may cause product damage or other losses due to improper operation. |
Do not handle the the power plug when your hands are wet. | |
Do not block the air inlet/outlet. | |
Do not use the unit in places with heavy humidity such as lampblack or bathroom. | |
Do not clean or reuse the high-efficiency composite filter. | |
Avoid unsupervised use by children, people with perceptual impairment, physical or intellectual disabilities. Make sure a safety person is present to supervise, provide guidance and assist in operating the machine. | |
Remove dust from the air purifier and power plug regularly. | |
Use only the power adapter included with this product. | |
Be careful when cleaning the air purifier. Strong corrosive cleaners may damage the unit's surface. | |
Do not approach the device, nor place it on heat sources (such as fireplaces, heaters or places that may come into contact with flammable gases). | |
Unplug the adapter from the power socket when cleaning the unit or when it's not in use. Otherwise, it may lead to electric shock or fire caused by short circuit due to poor insulation. |
If the product picture is different from the real one, the real one shall prevail.
ICON | NAME | DESCRIPTION |
POWER | Power the air purifier ON and OFF. | |
SPEED | Adjust fan speed (1-5). | |
SLEEP | FILTER | Press the SLEEP button to enter the sleep mode when the purifier is working; If the icon becomes red, replace the filter screen. | |
TIMER | Press this button to realize automatic switching on/off. | |
LIGHT | Adjust the ambient light mode. | |
AUTO | Press this key to enter automatic mode when working. The fan speed changes from 1 to 4 according to the PM2.5 concentration change. | |
Child lock | Press and hold the " "+ " " for more than 3 seconds in the working state to enter the child lock mode. |
A VARIETY OF FUNCTIONS IN ONE
3-Stage Filtration
Pre-filter | Intercepts hair, dander, fibers and particles of all sizes. Can be vacuumed regularly. |
HEPA Filter | H13 HEPA filter for high-efficiency filtration of particles as small as 0.3 micron, such as PM2.5, smoke, pollen, dust and other pollutants. |
activated carbon filter | High iodine value activated carbon, effective adsorption of VOC, cigarette odor, lampblack odor, pet odor and other harmful gases. |
Note:
activated carbon fiter, HEPA filter and Pre-filters are compounded in the same filter.
Precautions for use
Power ON / OFF
Press " " in the standby mode, the machine is ON, and the button is bright white. Press "" again to shut down. The button will become bright red, and enter the standby mode.
Speed
In the working state, press " "when the wind speed button is fully lit, the machine will enter the manual mode, to manually set the fan running speed. Press " ", and select the machine speed (1-2-3-4-5 cycle).
Light
Touch "" to adjust the light brightness. Each touch will change the ambient light mode.
5 modes to choose:
When the touch panel is completely black, press any key to wake up " "
Memory function
With the device powered ON, the machine will remember the previous wind speed and light settings each time it is turned on. But when the adapter is plugged back in, it will go back to its default state. Upon start, the machine will default to auto mode.
Child lock
This feature is designed to prevent misuse or accidental manipulation by pets or children. You cannot change the air purifier settings in this mode.
Press and hold the " "+ " " for more than 3 seconds in the working state to enter the child lock mode. The child lock icon will light up on the display screen. All other buttons will remain OFF.
In the Child Lock mode, press and hold " "+ " " for more than 3 seconds to exit the child lock function. Then the child lock icon on the display screen will go OFF.
Sleep | filter
When the machine is in SLEEP mode, it will continue to operate silently, with all indicators and ambient lights turned OFF.
Press " " in the working state, and it will enter in SLEEP mode. Once in sleep mode, the SLEEP button and icon will remain ON, while all other icons and indicators are OFF. After 10 seconds, the SLEEP button and the SLEEP icon will go OFF, and the wind speed will adjust to the SLEEP mode.
When in SLEEP mode, press any button once to wake up the screen. The SLEEP button and icon will go ON. Press it within 10 seconds to exit the SLEEP mode.
Timer
Press " ", the timer button light will turn ON to set the timer. The screen will display the timer's set time. Each touch, will increase the timer by 1 hour, the value range is 0-12. When the value is 0, the timing can be canceled. Release the button and after 3 seconds the timer will be set. The timer will then start counting down.
press " "in the working state to set timed shutdown; press "" in the standby state to set timed start.
Auto
Press " " in the working state to enter the Smart mode. The Auto button will be fully lit, the wind speed will adjust to the PM2.5 concentration values, and the wind speed gear will be set between 1 and 4. The color of the air quality indicator will change according to the PM2.5 concentration values.
PM2.5 Value | Air quality | PM2.5 air quality indicator | Wind speed gear |
0-12 | Excellent | Green | 1 |
13-35 | Good | Blue | 2 |
36-55 | Poor | Yellow | 3 |
>55 | severe | Red | 4 |
THE ADAPTER MUST BE UNPLUGGED BEFORE ANY MACHINE MAINTENANCE OPERATION.
Note: do not use hard objects to scratch the machine shell. When removing the base, follow the instructions to avoid damaging machine parts.
* The filter's life is is about 3000 hours, and the 5 indicator lights will decrease by one every 600 hours. When the filter's remaining life is lower than 150 hours, the filter button will turn red, and the last indicator light will start flashing (1Hz) to warn the filter screen needs to be replaced.
When this happens, replace the filter and press the filter button to reset the filter's life indicator.
Filter life reset:
When the filter life is ≥150 hours, touching the filter's life reset button (3s) will not reset the filter's life, but only a emit a"ding" sound. When the filter life is <150 hours, the filter's life reset button will turn red: long press the filter's life reset button (3s).A "ding" sound will confirm the filter's life is reset, . The filter's life reset is completed, and the indicator light of the filter life is fully on.
Mandatory reset of filter life:
Within 30 seconds after power-on, in the standby mode, long press the filter reset button (more than 3s). A a "ding" sound will indicate that the filter life is forced to reset, , and the screen will flash 6 times (2 times/second), indicating that the mandatory reset action has been completed. Reboot, and the filter's life indicator light turn back on.
* Depending on the machine's environment, the filter's life will be different. For example, in places where people smoke and pets are present, the life of the screen is shorter. When the purification effect is not good, replace the filter in time.
* Please dispose the used waste filters according to the relevant regulations of solid waste.
PROBLEM | POSSIBLE CAUSE | POSSIBLE SOLUTION |
Product is not working properly |
|
|
Fresh air doesn't flow smoothly out of the outlet |
|
|
The machine makes an abnormal sound during operation |
|
|
After replacing the filter, the filter replacement indicator is still blinking |
|
|
Feel the wind weakening |
|
|
The air purifier gives off a bad smell |
|
|
The most Frequently Asked Questions about this product are listed here. If you cannot find the answer to your question, please contact our after-sales service department.
Jafanda products have a 1-year warranty from the date of purchase. Jafanda guarantees that all products conform to the highest quality materials, workmanship and services from the date of purchase until the end of the warranty period.
Jafanda will replace any product found defective due to manufacturer defects based on qualification. Refunds are available within 30 days of purchase. The limited warranty applies only to air purifiers installed, used and maintained in accordance with this instruction manual.
EXTENDED ONE-YEAR WARRANTY:
Register your product at www.jafanda.com/pages/warranty to extend your warranty for an additional year.
Please fill out all required fields and include your order ID, place of purchase, and purchase date if applicable.
Join the jafanda Community on Social Media
@JAFANDA US
Jafanda LLC.
1309 Coffeen Avenue STE 4304 Sheridan, Wyoming 82801 support@jafanda.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the JF260 that isn't answered in the manual? Leave your question here.