Sinope SP2600ZB - Smart Plug Manual
Also See for SP2600ZB:

Advertisement

Sinope SP2600ZB - Smart Plug Manual

INTRODUCTION

Device appearance
The SP6000ZB Smart Plug allows you to control your device remotely with your smartphone, tablet, or computer. The plug also measures the power consumption of connected devices, and you can track the number of kilowatt-hours consumed from anywhere, anytime *.

This guide will give you an overview of the Sinopé Smart Plug and will help you perform the initial setup.

NOTICES

  • Indoor use only
  • Do not exceed the rated current of the plug.
  • The ON / OFF button is used to turn the device on or off. The Smart Plug must be located where the ON / OFF button is easily accessible and can also be unplugged from the main outlet.
  • Clean only with a dry cloth.
  • shock hazard Risk of electric shock: the integrity of the grounding must be maintained.

* Available functionality if supported by your compatible Zigbee gateway and its application.

YOUR DEVICE

Device Overview

ADD YOUR DEVICE TO THE GT130 GATEWAY AND NEVIWEB

  1. If you do not have an account yet, download the Neviweb app for iOS or Android to create an account and add your device.

www.apple.com

play.google.com

  1. Tap the , then select "Add Device".
    ADDING THE DEVICE TO THE GT130 GATEWAY AND NEVIWEB
  2. Follow the steps of the Installation Wizard.

CONNECT YOUR UNIT TO THE GT130 GATEWAY OR A COMPATIBLE ZIGBEE SYSTEM

  1. Initiate the connectivity session by pressing the RF button on the GT130 gateway. The indicator light will start flashing.
    Compatible Zigbee gateway: refer to the installation guide for the latter.
  2. Connect the smart plug to your network by pressing the ON / OFF button for 5 seconds.

The connection status light
Blinks green: The smart plug is connecting
Green for 5 seconds: Connected

Note: If the smart plug cannot reach the gateway's network after 20 seconds, try to connect it again.

  1. Connect all your compatible Zigbee devices the same way, by going to the next closest device.
  2. When your smart plug is connected, close the connectivity session of your GT130 gateway or your compatible Zigbee gateway.

Reset: Press and hold the ON / OFF button for 5 seconds. (The indicator will remain on for 5 seconds.)

TECHNICAL SPECIFICATIONS

Operating voltage: AC 120 V 60 Hz
Maximum load: 120V - 15A
Resistive: 1800 W
Incandescent: 960 W
Electronic ballast: 500 VA
Motor: 0.5 HP
Operation temp.: 0°C to 40°C (32°F to 104°F)
Storage: -20°C to 50°C (-4°F to 122°F)
Certifications:
Conforms to UL 60730-1 / CSA E60730-1

Indoor installation only

Zigbee HA 1.2 profile
Frequency: 2.4 GHz
Transmission power: +8 dBm

Neviweb is a registered trademark of Sinopé Technologies Inc. in Canada and the United States.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.

burn hazardburn hazard
Failure to follow these safety instructions can result in fire, electric shock, other personal injuries, or damage to the smart plug and other property. Read all the safety instructions below before using the smart plug.

  • Avoid using in an environment with high humidity or extreme temperatures.
  • Do not expose the device or its accessories to flammable liquids, gases, or other explosives.
  • Controllable devices should never be used to supply power to or control the ON / OFF status of medical and/or life support equipment.

3-YEAR LIMITED WARRANTY

SINOPE TECHNOLOGIES INC. warrants the components of their products against defects in material and workmanship for a 3-year period from the date of purchase, under normal use and service, when proof of purchase of such is provided to the manufacturer. This warranty does not cover any transportation costs that may be incurred by the consumer. Nor does it cover a product that has been improperly installed, misused or accidentally damaged. The obligation of SINOPÉ TECHNOLOGIES INC., under the terms of this warranty, will be to supply a new unit and this releases the manufacturer from paying the installation costs or other secondary charges linked to replacing the unit or the components.

For more information, visit our Website:
www.sinopetech.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sinope SP2600ZB - Smart Plug Manual

Advertisement

Need help?

Need help?

Do you have a question about the SP2600ZB and is the answer not in the manual?

Questions and answers

Table of Contents