Alfajr WR-02 - Smartwatch Manual

MAIN FEATURES

• Azan times for 250 cities.
  New cities can also be programmed
• Prayer reminders ( independently set before or after azan times)
• Qibla direction from the North
• English and Arabic languages
• Hijri and Gregorian calendars
• Two daily alarms
• Five different methods to calculate Azan times
• Qur'aan bookmark for last read
  Sura name and Verse number
• Daylight saving time option
• Full screen EL light
• Stop Watch
• Water resistant

MAIN MENU

Main Screen:


Note: To set time, Gregorian calendar and your city press and hold for a while at main screen. To set Hijri calendar or any prayer alarm, move to the desired screen then press .

Note: The watch will automatically go back to the main screen after few seconds (if buttons are not pressed ).

Setting Time, Calendar and City

1. Press & hold set for 2 seconds to enter setting
   
2. Adjust hours using + or - then press
   
3. Adjust minutes using + or - then press
   
4. Adjust day using + or - then press
   

Note: When adjusting hours, notice the flashing AM or PM.

5. Adjust month using + or - then press
   
6. Adjust year using + or - then press
   
7. Select your city using + or - then press
   
8. Qibla will appear for few seconds
   
9. Calculating new azan times
   

Note: After selecting any city that uses Daylight Saving Time (DST), the DST option screen will appear before Qibla screen.

SETTING HIJRI CALENDAR

To set Hijri calendar, move to Hijri calendar screen (by pressing + ), then:

1. Press & hold for a while to enter setting
   
2. Adjust day using + or - then press
   
3. Adjust month using + or - then press
   
4. Adjust year using + or - then press
   

Note: When the Hijri calendar is set, the Gregorian calendar is not affected. However, after setting the Gregorian calendar, the Hijri calendar will be readjusted according to the astronomical moon sighting at Mecca.

SETTING PRAYER ALARMS

Prayer alarms are useful to remind you of Iqama or Salat time. Each prayer alarm can be set to ring before or after the azan time by any interval. Each alarm duration can be adjusted (in seconds), or can be turned off. The icon near an azan time indicates that the prayer alarm is ON (for that particular azan).

Example: To set Zuhor prayer alarm to always ring after the azan by 10 minutes, move to Zuhor azan screen, W KHQ

1. Press & hold set to enter setting
   
2. Adjust alarm hours, then press
   
3. Adjust alarm minutes, then press
   
4. Adjust alarm duration, then press
   

Note: When you buy the watch, prayer alarms will ring exactly at the azan times.

ADVANCED MENU

ADVANCED MENU DESCRIPTION

	Alarm 1 is a daily general purpose alarm. Its setting is similar to the prayer alarms setting. The icon indicates that it is ON.
	Alarm 2 is another daily alarm similar to alarm 1. The activation of this alarm is indicated by the small icon.
	Language selection: English or Arabic.
	The watch uses the local taqweem or the most widely used system in your city. Other available taqweems: Um Alqura, Egypt, Islamic world organization, ISNA, and Islamic scientific university [Hanafi system].
	Stop Watch with accuracy 1/10 second. Press to enter and exit, press + for Start/Stop, and press - to reset to
	Three volume levels (for all alarms): 2 is High, 1 is Low, or OFF.
	Time display: time format in main screen (hours: minutes: seconds) can be displayed with or without seconds. You can also hide or display the coming azan time in the main screen.
	The expected battery life is more than a year. The Cr2016 battery, used in this watch, should be replaced when the level reaches Battery level in Volts can also be displayed, by pressing
	Main Calendar: either the Gregorian or the Hijri calendar can be displayed in the main screen.
	Daylight Saving Time (DST) selection. When this option is turned ON, all azan times will increase by one hour.
	Our web page address: www.alfajr.com

Note: The watch will automatically go back to the main screen after few seconds. But to quickly go back to the main screen, press and hold for two seconds.

PROGRAMMING NEW CITY

Any city around the world can be programmed. For example, the following steps show how to program the city of Taif with (GMT+3); located on Latitude 21° 15' N and Longitude 40° 20' E.

1. Follow the steps from "Setting Time, Calendar and City" section till you get to city selection
2. Press + or - to choose then press
3. Adjust latitude ( 21 N ), press , adjust minutes ( 15 ), then press
4. Adjust longitude ( 40 E ), press , adjust minutes ( 20 ), and press
5. Adjust (+ 3 ) then press
6. Adjust daylight saving time ( ) and press
7. the watch will display Qibla direction and will calculate new azan times.

Note: If azan times are not correct, check the following: city's coordinates, Gregorian calendar, DST option, and select the appropriate taqweem.

QURAN BOOKMARK

Quran bookmark screen displays the last Sura name and Verse number read. To reach this screen, press + then again press and hold + for 2 seconds. To change the bookmark, use + or -.

IMPORTANT COMMENTS

1. After setting any city, the Qibla direction from the North is displayed. The arrow indicates North, indicates Northeast, etc.
2. Over 250 cities around the world are programmed in this watch. To program any new city, follow the steps in section above.
3. If azan times are not correct, check the following: city selection, Gregorian calendar, DST option, and select the appropriate taqweem. Note that azan times may differ by few minutes in some cases.
4. The next azan time is displayed at the bottom of the screen, and it is updated after 30 minutes from current azan time.

www.alfajr.com

Documents / Resources

References

• الفجر - الساعات الإسلامية الرائدة

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Alfajr WR-02 - Smartwatch Manual