SecuFirst CAM222 - Outdoor Camera Quick Start Guide

Box content

Installation

Screw on the Wi-Fi antenna to the IP camera.

Connect the power adaptor to the IP camera and a 230V socket.

DO NOT connect an Ethernet cable during installation.

App

Download the Secufirst HD Professional Edition app from the Google Play Store (Android) or Apple Store (iOS).

Wi-Fi connection

Go to the Wi-Fi settings of your smartphone ir tablet.

Connect to a Wi-Fi signal called "HD-0........".

The password of this Wi-Fi network is 12345678 (Note, this connection has no internet available, this is correct).

Note, if this Wi-Fi signal is not being showed, remove the Ethernet cable and adaptor and plugin the adaptor again, or reset the camera (See additional information below).

Open the app Secufirst HD Professional Edition and tap "Press to add new system".

Tap "Wireless setup" and wait for 10 seconds.

Insert 2 new passwords.

1. Security password (To have live view).
2. Admin password (To change setting of the camera).
   Tap "OK" and insert the 2 passwords which contain:
   1. Minimum of 12 characters.
   2. At least one capital letter (Example: A).
   3. At least one small letter (Example: a).
   4. At least one digit (Example: 1).
   5. At least one reading sign (Example: !).

The new difficult passwords is for your own protection so other unwanted people cannot have access to your camera.

Tap "Save" button.

Select your own Wi-Fi network.

There will be displayed 1 network but you can view all networks close to the camera by tapping the small arrow on the right side of the displayed network.

After you have selected your Wi-Fi network insert your own Wi-Fi password (Note, this is your own Wi-Fi password, not the password you have entered in the step above).

Tap "Save" button.

Note, The Wi-Fi network "HD-0......" will not be visible again.

It's only during the installation of the camera.

The IP camera will restart.

Live view

Tap "live view" and wait about 100 seconds.

The screenshot will show "Connected" after 100 seconds and you can tap on "Play" to have the live view.

1. Make a snapshot of the image you have on your phone.
2. Audio unmute / mute
3. Record the live video manually
4. Return to main menu.

Settings in the main menu

1. Add a new device.
   Only needed when you buy another SecuFirst branded item.
   We have an all-in 1 app for the categories: IP camera, Door Entry, Alarm, Home automation and Lighting.
2. Edit settings. When you tap on this button then 3 buttons will appear in the screenshot.
   1. Settings
   2. Erase current camera from this app.
   3. Events to look back at recordings (only if you have insert a micro SD card into the camera).
      Tap the "Edit setting" button below to remove the 3 buttons in the screenshot.
3. Reconnect button.
   If the camera doesn't show "Connected", tap this button.
4. Info button.
5. Quad view.

Advanced settings

To go the advanced setting tap "Edit settings" and then the "Settings" button in the screenshot.

Please enter your Camera name, example: Garden camera, then tap "Save".

To go the advanced setting tap "Edit settings" and then the "Settings" button in the screenshot.

Below in the next screen tap on the button "Advanced".

Insert the second password (Admin password).

All the Advanced settings are explained in our big manual.

Downloads

Downloads available on our website www.secufirst.eu

• Big manual
• How to install movies

Additional information

Video recording

Insert a Mirco SD card, maximum 128GB, XC Class 10 or XC Class 10 UHS1 (Not included).

Please disconnect the power adaptor before you install the Micro SD card.

Put the Micro SD card in the Micro SD card slot and connect the power adaptor again.

Finally you need to format the SD card in the advanced settings of the app (FAT32).

Installation 2nd Smart device

Download and install the "Secufirst HD Professional Edition" app on your smart device.

Open the app and tap "Press to add new system".

Tap "Existing System".

Enter camera name (Your own choice), DID code and password.

Tap "Save" button, then "Yes" to save the system.

Reset the camera to default

The camera can be reset to default settings by holding the button on the power cable for 15 seconds.

You notice the camera is reset when the LED starts flashing quickly.

The camera will reboot and after 60 seconds the camera will be ready.

Reset the device is needed in case of:

1. Installation cannot be completed
2. Forgot your password
3. Change to a new Wi-Fi network in another location.

ALC Electronics B.V.
Ericssonstraat 2
5121 ML Rijen | The Netherlands
Email: info@alcelectronics.eu
Tel: +0031 (0)85 00 80 888
www.secufirst.eu | www.alcelectronics.eu