Alpina Smart Wi-Fi Remote Control 871125226558 Quick Start Guide

Safety information

• When using electrical devices, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons including the following:
• Read all instructions before use and keep for future reference.
• Disconnect the product from the mains and other equipment if a problem should occur.
• Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
• Children shall not play with the device.
• Keep the device and its cord out of reach of children less than 8 years.
• This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved.
• Do not use the device if any part is damaged or defective. If device is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• The device is suitable for indoor use only. Do not use the device outdoors.
• Do not expose the product to water or moisture.
• Do not touch the device with wet hands.
• Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.

Function

1. Reset button
2. Status indicator
3. USB port (Micro USB)

Using the device

1. Download and install the app " Alpina Smart " from Apple App Store or Google Play Store on your mobile device.
2. Launch the app " Alpina Smart ".
3. Create a new account or log in to your existing account.
4. Tap "+" to add the device.
5. Select the applicable product type from the list.
6. Use the USB cable to connect the power adapter to the device. Insert the mains plug of the power adapter into the wall socket.
7. If the light does not flash: Press and hold the reset buttons (about 6 seconds).
   If the light flashes: Confirm in the app.
8. Confirm the Wi-Fi network and password.
   Note: make sure to use the 2.4 GHz network instead of the 5 GHz network.
9. Enter the device name.
   Note: This name will also be used by Amazon Alexa and Google Home.

Specifications

The symbol above and on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The Waste of Electrical and Electronic Equipment (WEEE) Directive has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill. Contact local authorities for information on the correct disposal of Electrical or Electronic equipment.

A.I.&E. Adriaan Mulderweg 9-11
5657 EM Eindhoven, The Netherlands
Edco UK Ltd, 1st Floor Two Chamberlain Square
B3 3AX, Birmingham, UK