Princess Electric Multi Sharpener 492901 Manual

SAFETY

• By ignoring the safety instructions the manufacturer can not be hold responsible for the damage.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Never move the appliance by pulling the cord and make sure the cord can not become entangled.
• The appliance must be placed on a stable, level surface.
• The user must not leave the device unattended while it is connected to the supply.
• This appliance is only to be used for household purposes and only for the purpose it is made for.
• This appliance shall not be used by children from 0 year to 8 years. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
• To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.
• Do not allow children to use the device without supervision.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
• Always disconnect the device from the supply if it is left unattended and before assembling, disassembling or cleaning.
• This appliance is intended to be used in household and similar applications such as:
  • Staff kitchen areas in shops, offices and other working environments.
  • By clients in hotels, motels and other residential type environments.
  • Bed and breakfast type environments.
  • Farm houses.

PARTS DESCRIPTION

1. On/Off switch
2. Sharpening guide cap
3. Main cable

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable parts with a damp cloth. Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V 50/60Hz)

USE

• Select the desired setting by turning the grinding head. Turn the grinding head until the desired symbol is pointed upwards. To turn the device on using the push button. The beating engine sound you hear is normal and is no cause for alarm.
• Only sharpen clean objects. Move all knives and scissors under slight pressure in one fluent movement towards your body during the sharpening operation. Never move in both directions. Repeat this procedure until the desired degree of sharpness has been obtained. The quality of the sharpening procedure is primarily dependent on the quality of the steel. Always sharpen knives and scissors about the whole length in order to avoid deformations. Strong pressure and tilting the tools block the grinding disc. In this case start the sharpening operation once again. Knives with fine serrations do not need resharpening.

Knives with a plain edge (picture 1)

• Sharp on both sides. The two knife guideways in the sharpening head are for the right and left side of the knife. The knife in the right guideway has to be put up against the right side. The knife in the left guideway has to be put up against the left side.

Fine kitchen cutlery with serrations (picture 2)

• Sharp only on the plain side. The sharpness of fine kitchen cutlery is already, when purchasing, not comparable with the sharpness of knives with a plain edge. The profile of the blade admits a resharpening up to the absolute sharpness only with limitations.

Serrated knives (picture 3)

• Sharp on the side of the serration only. The knife has to be put into the blade guideway with the serrations directed downwards. A sharpening of the different kinds of serrations is only possible with limitations. A gradual flattening of the serration points is unavoidable.

For sharpening scissors (picture 3)

• First unclasp. Put both blades, one after the other, into the guideway. Attention: Be careful when touching the sharpened blades.

Screwdriver blades (picture 4)

• Put in the right format the front of the sharpening head. Small tools can be sharpened at the grinding disc, which is freely accessible after removing the sharpening head.

Changement of grinding discs (picture 5)

• Keep hold of the grinding disc and remove the screw. A spare grinding disc can be ordered from the service department of the manufacturer.

CLEANING AND MAINTENANCE

• Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel wool, which damages the device.
• Never immerse the electrical device in water or any other liquid. The device is not dishwasher proof.

[WEEE Logo]

service.princess.info

© Princess 2015