Salter SL2093 - 4 Way Timer & Clock Manual

Salter SL2093 - 4 Way Timer & Clock Manual

Advertisement

Salter SL2093 - 4 Way Timer & Clock Manual

TO INSTALL BATTERIES

The battery compartment is located on the back of the timer. Insert batteries (2 x LR44) observing the polarity signs (+ and -) inside the battery compartment. Replace cover.

TO SET CLOCK

  1. Press "Clock" button to select clock mode.
  2. Press "H" to select a 12 or 24 hour clock.
  3. Press and hold "Clock" for 3 seconds. The digits will begin to flash.
  4. Press "H" to set hours. Press "M" to set minutes. Press "S" to set seconds. Press and hold the buttons to advance the digits quickly.
  5. Press "Clock" button again to confirm the time.

TO SET TIMER

  1. Press "T1","T2","T3" or "T4" corner button to select a timer. "T1","T2","T3" or "T4" will appear on the LCD.
  2. Press "H" to set hours. Press "M" to set minutes. Press "S" to set seconds. Press and hold the buttons to advance the digits quickly.
  3. Press "Start/Stop/Memory" to start timer countdown.
  4. Press "Start/Stop/Memory" again to pause or resume timing.
  5. At "00:00", the alarm will sound for one minute. The timer will start to count up. Each timer has its own distinctive alarm.
  6. Press "Start/Stop/Memory" to silence the alarm and recall the last time set.
  7. When the timer has stopped press "Clear" to reset the timer to zero.
  8. Multiple timers can be run by repeating steps 1-7 above.
  9. Timers running in the background are indicated by flashing "T1","T2","T3" or "T4" symbols on the LCD. To view the countdown for "T1" press the "T1" corner button (similar for "T2","T3" or "T4").

COUNT UP FEATURE

  1. Press "T1","T2","T3" or "T4" corner button to select a timer.
  2. When the timer is displaying "00:00" press "Start/Stop/Memory" to start count up.
  3. Press "Start/Stop/Memory" again to pause or resume timing.
  4. When the timer is stopped press "Clear" to reset the timer to zero.
  5. Multiple timers can be run by repeating steps 1-4 above.

USE AND CARE

  • If the display begins to disappear or alarm sounds faint, replace batteries. Always remove flat batteries.
  • Do not place on or near hot surfaces.
  • Do not immerse in water.
  • To clean, simply wipe with a damp cloth.

HoMedics Group Ltd
PO Box 460,Tonbridge, Kent, TN9 9EW,UK.

www.salterhousewares.co.uk

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Salter SL2093 - 4 Way Timer & Clock Manual

Advertisement

Need Assistance?

Do you have a question about the SL2093 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents