Advertisement
SWITCH OFF THE INDUCTION COOKER IN CASE OF ANY CRACK ON THE COOK-TOP PANEL
Hot Pot Function:
Fry Function:
Fried Function:
Soup Function:
Low Fire Function:
Water Function:
Steam Function:
(3:59 HOURS TIMER & 23:59 PRESET)
During operations, if any errors occurred, please check the following table before calling for service. Below are common errors and solutions.
PROBLEM | CHECK POINTS | SOLUTION |
After connecting the power and pressing the "Power"key, the appliance has no response | Power outage? | Use when electricity resumes |
Is the plug connected firmly? | Check the root causes carefully. If the problem can't be fixed, please contact service center for checking and repairing. | |
Is the fuse broken down? | ||
Induction Cooker send out "Beep" Sound | Incompatible cookware or no cookware is used? | Replace compatible cookware for the induction cooker |
Is the cookware not considerable placed from the center of the heating zone? | Replace the cookware at the center of the defined heating zone | |
Is the cookware bigger than 12cm? | Change the diameter of cookware bigger than 12 | |
No operation during the heating being in use | Is the cookware empty or the temperature too high? | Please check whether the appliance is being misuse |
Is the air intake/exhaust vent clogged or dirt has accumulated | Remove the stuff clogging the air intake/exhaust vent. Operate the appliance again after cooling down. | |
Is the cooker working over 2 hours without any external instruction? | Reset cooking modes or use timer function | |
PHENOMENON | CHECK POINTS | SOLUTION |
Error Codes Occur EO | No Cookware or Incompatible cookware used | If error signal EO, E3, ES shows, please check whether the cookware is not suitable or switch on the appliance again after it cooled down naturally. If error signal E1, E2, E4, E6, occurs please contact service center for checking and repairing |
Error Codes Occur E1 | Low-Voltage | |
Error Codes Occur E2 | High-Voltage | |
Error Codes Occur E3 | Top Plate Overheat | |
Error Codes Occur E4 | Top Plate Sensor Open Circuit | |
Error Codes Occur E5 | IGBT Overheat | |
Error Codes Occur E6 | Top Plate Sensor Short Circuit |
If the above solutions can't fix the problem, unplug the appliance immediately, contact service center for inspection and repairing, note the error code and report it to service center ltd. To avoid any danger and damage to the appliance, do not disassemble or repair it by yourself.
VISIT US ONLINE:
Have a question?
Need service or repair?
Want to leave a comment?
PyleUSA.com/ContactUs
www.NutriChefKitchen.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download NutriChief PYLE PKSTIND26 - Induction Cooker Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the PYLE PKSTIND26 that isn't answered in the manual? Leave your question here.