Zadro SLVR410 - Dimmable Sunlight Vanity Mirror Manual

FEATURES

READ ALL INSTRUCTIONS BEFORE USE
The Zadro^® Dimmable Sunlight Vanity Mirror is designed to give you optimum performance and convenience.

• Dual-Sided Surround Light Vanity Mirror provides a 10x Magnifying Mirror and 1X True View Mirror
• Mirror Swivels 270°. *Do not force past rotational stop. (Failure to follow these instructions will invalidate your warranty)
• Height Adjustable From 20¾" Tall Down to 11½"
• 7½" Round Mirror with Optical Quality Glass
• Fog-Free When Lit, Distortion-Free, Glare-Free

OPERATING INSTRUCTIONS

1. Your Dimmable Sunlight Vanity Mirror will swivel 270° so that you can use either the 10X magnifying mirror or the true view 1X mirror located on the opposite side.
2. To turn on lights, simply turn the switch at the base of the mirror to the ON position.
3. Twist knob until desired brightness level is achieved.
4. After use always switch to the OFF position.

To reduce the risk of burns, fire, electric shock, or injury to persons:

• Be sure the mirror is not in a position where it can reflect sunlight. Reflected light can cause fire.
• Close supervision is necessary when this appliance is used by, or near children, or disabled persons.
• Use this mirror only for its intended use as described in this manual. Never operate this mirror if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return unit to manufacturer for examination and repair. Do not use outdoors.
• Keep the cord away from heated surfaces.

THIS PRODUCT IS PROVIDED WITH A POLARIZED PLUG. AS A SAFETY FEATURE, THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT, REVERSE THE PLUG.
IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE AN EXTENSION CORD. DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE.

CARE AND MAINTENANCE

If properly used and cared for, this appliance will give you many years of worry-free service.

1. Always unplug the mirror before cleaning.
2. For unit, use a damp cloth. For the mirror surface, use a damp cloth or glass cleaner.

LIGHT BULB REPLACEMENT

To reduce the risk of fire, use only 22 type watt bulb.
To replace the light bulb, place the mirror face down on a flat surface and follow these steps:

• Unplug the power cord from the outlet.
• Lay mirror flat on a towel or soft but sturdy surface (see Fig. A)
  
• Remove front light cover (see Fig. B) by pushing down, slowly turning counter clockwise and pulling the front light cover out from 10X magnification side (curved side).
  
• Gently pull up the old bulb from the socket (see Fig. C) and replace the new bulb in the socket.
  
• Reverse the steps now to assemble the mirror.

  Model	Description
  FB681	Replacement bulb for SLVR410
  To order, visit our website at www.ZADROINC.com or call customer service at (800) 468-4348