Summary of Contents for TallyGenicom Intelliprint ML320
Page 1
Unpack the High Capacity Feeder from the shipping container WARNING: To prevent the danger of electric shock, before installing any options be sure to turn the power switch of the printer to the off [O] position and disconnect the power cord from the wall outlet.
Page 2
High Capacity Feeder (HFC) Setup Guide Disconnect the power cord from the wall outlet. Lock the two front casters of the HCF unit. Publication No. GEK-89570 Dec 98...
Page 3
When lifting the machine, get a firm footing and bend your knees to avoid possible injuries to your back. Before moving the printer, be sure to unplug the printer from the AC outlet.
Page 4
High Capacity Feeder (HFC) Setup Guide Locate the two supplied connecting parts and screws. Using one of the thumbscrews, tighten the right connecting part to the printer as indicated. Using the other thumbscrew, similarly secure the left connecting part to the printer.
Page 5
Insert Trays 2 and 3 back into the printer and HCF unit respectively. Remove the tape securing the connecting cable of the HCF unit. Securely plug the HCF cable into the tray connector on the printer. Dec 98 High Capacity Feeder (HFC) Setup Guide 5...
Page 6
High Capacity Feeder (HFC) Setup Guide Connect the power cord to the wall outlet. Turn the printer power switch to the ON [ I ] position. The installation of the optional High Capacity Feeder (HCF) is now complete. Publication No. GEK-89570...