Advertisement
This manual will guide you through the functions, usage, and proper care of your T580 Warrior. Before operating your hoverboard, please read all instructions. If you have any questions or cannot find the information you need in this manual, please contact your place of purchase or our customer service at 1-844-299-0625. Before contacting customer service, please have your purchase information ready as this may be needed during the call.
When reading this manual, note these icons:
Notes with this icon MUST be read, understood, and obeyed to prevent injury or damage, etc.
Notes with this icon include relevant information.
The SWAGBOARD T580 Warrior is a self-balancing, personal transporter that uses gyroscopic technology to revolutionize the way you travel. Steering and stopping are controlled by Dynamic Equilibrium, all based on shifting your body weight.
A zero emissions product, the SWAGBOARD T580 Warrior is environmentally friendly and uses only the highest quality components and industry-leading safety features.
The T580 Warrior includes all new features:
The T580 Warrior has been designed with the utmost safety in mind for its riders. As with any riding product, however, the SWAGTRON has inherent hazards associated with its use (for example: losing control, falling off, or riding it into a hazardous situation). Therefore, it is important to read and follow all instructions and warnings in the user manual and use good judgment when riding and using the hoverboard.
By riding the T580 Warrior, the user acknowledges and accepts responsibility of all risks associated with the use of the T580 Warrior, which may include, but are not limited to, muscle injuries, broken bones, lacerations, or other serious injuries.
To better ensure your safety, ALWAYS USE APPROPRIATE PROTECTIVE GEAR, read and follow all instructions and warnings in the user manual. Appropriate protective gear should include shoes, kneepads, elbow pads and an ASTM F1492 approved helmet.
IF YOU ARE EVER IN AN ACCIDENT, PLEASE CONTACT EMS / DIAL 911 IMMEDIATELY.
Maximum Weight | 220 lb / 100 kg |
Minimum Weight | 44 lb / 20 kg |
Maximum Speed | 7.5 mph / 12 km/h |
Max Incline | 10 - 12° |
Please see SAFE RIDING TECHNIQUES for safe riding techniques and additional safety information.
TO PREVENT ELECTRIC SHOCK, MATCH THE WIDER PRONG OF PLUG TO THE WIDE SLOT IN OUTLET. FULLY INSERT.
FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment.
This product satisfies FCC Regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.
This technology is multi-layered protection for your hoverboard. The T580 Warrior features incombustible body materials and utilizes a lithium free battery pack that includes a Battery Management System. This system protects the battery against overvoltage, temperature increases, overcharging, overcurrent, and short-circuiting.
For more information on the battery specifications, see BATTERY INFORMATION.
The T580 Warrior has a built-in Startup Balancing feature which may be turned on or off via the T580 Warrior itself. This feature enhances the unit's self-balancing feature by further stabilizing the board and ensuring that the pedals always face up. By default, this feature is turned on. With this feature on, if the rider falls or otherwise dismounts the unit while moving over an incline, the unit may continue to move on its own as it attempts to balance, resulting in damage to others, surrounding obstacles, and/or the unit itself.
To turn the feature off, use the power button. While the unit is powering on, quickly press and release the power button a second time. You will hear a confirmation beep. Follow the same steps to turn the feature on again.
If you decide to use this feature, it is recommended to ride only on surfaces which are completely flat with stable terrain. When the unit is on and this feature is on, do not place your hands on or attempt to grasp the unit anywhere near the wheels or fenders. Doing so may cause the wheels to spin on their own for a brief moment. Always turn off the unit before lifting. Do not lift or carry the unit when this feature is on and the board is powered on. Failure to adhere to these warnings and/or instructions could result in injuries including but not limited to: abrasions, lacerations, smashed fingers and/or amputation of fingers, injury of others, and damage to surrounding objects.
The SWAGTRON® T580 Warrior includes three riding modes in order to provide all kinds of riders with the best experience possible.
Easily switch between Learning and Standard Mode directly on your hoverboard. After pressing the power button to power on the board, quickly press the power button a second time. A confirmation beep will emit when the T580 Warrior changes modes. Modes can also be changed via the SWAGTRON® app which is available in both the App Store and Google Play Store. The Advanced Mode can only be activated through the SWAGTRON® app.
STEP 1 | Power on the T580 Warrior to automatically turn on Bluetooth ®. The T580 Warrior will make a sound to indicate that Bluetooth ® is on and awaiting possible connection. |
STEP 2 | Using your mobile device, turn on Bluetooth ®, make it "discoverable" if needed, then search for the device names "Swagtron" & "Swagtron music" should appear. |
STEP 3 | Select "Swagtron music" to begin connecting if you would like to play music on your T580 Warrior. Connect to "Swagtron" through your SWAGTRON app with default password (000000) to switch modes and monitor your SWAGTRON T580 Warrior battery status. The T580 Warrior will make a sound to indicate that the devices have been successfully connected and/or paired. |
STEP 4 | After successfully connecting and/or pairing your T580 Warrior and your device/app, you may begin playing music or using SWAGTRON ® app at any time. |
STEP 5 | To end the connection between the devices, turn off Bluetooth ® on your mobile device. The T580 Warrior will make a sound to indicate that the devices have been successfully disconnected. |
In order to properly connect to the app, Bluetooth V4.0 is required from your mobile device.
Bluetooth ® Specification | Bluetooth ® V2.1+EDR |
Speaker Specification | 4Ω 3W/2Ω 5W |
Before riding, equip yourself with suitable protective gear. Make sure the hoverboard is placed on a level surface and fully charged. See CHARGING INSTRUCTIONS for charging instructions.
STEP 1 | Press the power button to turn on the hoverboard. |
STEP 2 | The hoverboard will enter self-balancing mode. Step on one pedal then quickly step on the second pedal with your other foot. |
STEP 3 | Stand upright but relaxed and lean slightly in the direction you want to go. Do not make any sudden or jerky movements. |
If the hoverboard doesn't seem to work, make sure your feet are centered on the pedals.
FAILURE TO USE GOOD JUDGMENT AND HEED THE ABOVE WARNINGS INCREASES THE RISK OF SERIOUS INJURY OR, IN VERY RARE CASES, DEATH. USE WITH APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.
The T580 Warrior uses an internal gyroscope with acceleration sensors to move based on your center of gravity. Do not bend at the waist. The movement will be mostly in your ankles.
MOVE FORWARD
Shift your weight forward to move straight ahead.
STOP
Return to an upright, standing position.
TURNING LEFT
Shift your weight slightly on the LEFT PEDAL to turn left.
TURNING RIGHT
Shift your weight slightly on the RIGHT PEDAL to turn right.
STEPPING OFF
With the hoverboard completely stopped, step back with your dominant foot, then quickly step off with the other foot. In general, it's easier to step off the back of the hoverboard. Be careful when stepping off for the first time.
The SWAGTRON has an inertial dynamic stabilization system that keeps you upright. However, it will stop detecting you if you lean too far left or right or if you take a foot off of the board. Slow down before turning or you will fall off and be injured.
If your SWAGBOARD T580 Warrior seems to pull to the left or right during your ride, you may need to recalibrate its sensors. The calibration process requires a flat stable surface and a level. Levels may be purchased separately at most hardware stores or level apps may be downloaded with most smartphones.
STEP 1 | Turn off the hoverboard. |
STEP 2 | Adjust the hoverboard so both pedals are level. Using a level tool is recommended for accuracy. |
STEP 3 | With the hoverboard level, press and hold the power button for about 6 seconds, until you hear a single beep. The lights will begin flashing. |
STEP 4 | Make sure the pedals are level, then press the power button again to turn the hoverboard off. |
STEP 5 | Turn the hoverboard on and try riding to check calibration. |
If the T580 Warrior is still not calibrated correctly, repeat steps 1 to 5 at least twice more before calling customer support for additional assistance.
Although the T580 Warrior is designed with gyroscopic balancing technology, it's still possible to fall off. Consider the following techniques and info to help ensure you have a safe, fun riding experience.
Item | Parameters |
Battery Type | LiFePO4 |
Charging Time | 4 Hours |
Voltage | 24V |
Working Temperature | 32°F ~ 104°F |
Charging Temperature | 32°F ~ 104°F |
Storage Temperature | 14°F ~ 122°F |
Storage Humidity | 65±20%RH |
Charge the hoverboard before using it.
STEP 1 | Make sure the hoverboard is powered off and connect the charger's cables and adapter if needed. |
STEP 2 | Plug the charger into a wall outlet (100V-240V; 50-60Hz) then plug the other end into the hoverboard. |
STEP 3 | Allow 4 hours for charging. The battery indicator may flash during charging and stop once charging is complete. Disconnect all cables once charging is finished. |
DO NOT, under any circumstances, use the hoverboard while it is charging or connected to the charger.
The charging time is approximately 4 hours. Charging longer than that may affect battery life and/or performance.
Use only the charger provided with your T580 Warrior. If you have lost or misplaced your charger, contact customer support to obtain a replacement. For the safety of yourself and others and to extend the battery's life, please be sure to follow charging instructions.
The indicators convey information about the battery level and the hoverboard's system. If the battery indicator changes color to indicate battery life is low, stop riding and recharge your hoverboard. If the system indicator flashes or otherwise indicates an error, stop riding immediately. Turn the hoverboard off, move it to level ground, and turn it back on again. If needed, re-calibrate the hoverboard by following the instructions in CALIBRATION. If none of the following resolves a system indicator error, contact customer service.
When fully charged, the T580 Warrior's maximum riding distance is 4-6 miles. Keep in mind, this is a maximum. Many factors show be considered when determining actual range per charge, including (but not limited to) rider weight, pavement conditions and incline.
Factor | Comment |
Speed and Riding Style | Keep a moderate, consistent speed. Frequent starting, stopping, acceleration, and deceleration will reduce riding range. |
Topography | Rough terrains or slopes can decrease your range due to motor use. Ride on smooth or even roads for maximum performance. |
Weight | The weight of the operator can influence your riding distance. |
Temperature | Avoid environments that are too hot or too cold, as the motor will decrease power as a safety feature. |
Misusing the battery may cause the battery to get hot, rupture, or ignite and cause serious injury.
Proper maintenance ensures the best riding experience. Consider the following tips and information to keep your T580 Warrior running in top condition.
Attempting to repair or modify your hoverboard can void all warranties. Only authorized repair centers may open and service the T580 Warrior. Contact customer support for assistance.
The T580 Warrior may need cleaning after riding. See the following tips below.
Department of Transportation (DOT) requirements affecting the packaging and transportation of all batteries containing acid or alkali are contained in the Code of Federal Regulations - 49 CFR Section 173.159.
SWAGBOARD T580 Warrior batteries are: UN2800, Batteries, Wet, Non-spillable. The batteries have been tested and meet the non-spillable criteria listed in 49CFR§173.159. Non-spillable batteries are accepted in CFR 49, Subchapter C requirements under the following conditions:
Item | Parameters |
Net Weight | 14 lb |
Dimensions | 22.8 x 7.6 x 7.2 in |
Chassis Height | 1.18 in / 3 cm |
Pedal Height | 4.3 in / 10.9 cm |
Chassis Material | ABS Casing |
Wheel Size | 6.5 in |
Tire Material | Solid Rubber Tire |
Maximum Speed | 7.5 mph / 12 km/h |
Turning Radius | 0° |
Climbing Capacity | 10 - 12° |
Maximum Load | 220 lb / 100 kg |
Minimum Load | 44 lb / 20 kg |
Working Temperature | 32°F ~ 104°F (0°C ~ 40°C) |
Charging Temperature | 32°F ~ 109.4°F (0°C ~ 43°C) |
Power | 110V – 240V |
Battery Type | LiFePO4 |
Battery Shielding | Fire-Retardant Plastic Casing |
Charger Voltage | 44.4 VDC, 0.5A |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the T580 Warrior and is the answer not in the manual?
Questions and answers