LAMAX Dots3 Play - True Wireless Earbuds Guide

Table of Contents

Contents

1 Controls
2 Switching on
3 Switching off
4 Pairing
5 Charging
6 Specifications
7 Documents / Resources
- 7.1 Download manual

Controls

Switch on	Hold down the multifunction button for 3 seconds
Switch off	Hold down the multifunction button for 4 seconds in the unpaired state
Play / Pause	Tap the multifunction button
Volume up	Double tap the multifunction button on the right earphone
Volume down	Double tap the multifunction button on the left earphone
Next song	Hold down the multifunction button on the right earphone for 3 seconds
Previous song	Hold down the multifunction button on the left earphone for 3 seconds
Answer call	Tap the multifunction button
End call	Tap the multifunction button
Reject a call	Hold down the multifunction button for 2 seconds
Music / Game mode	Triple tap the multifunction button on the right earphone
Activate mobile assistant	Triple tap the multifunction button on the left earphone

Switching on

The earphones automatically switch on when removed from the charging station. To switch on manually, hold the multi-function button for 3 seconds. An audible notification sounds when switching on.

Switching off

The earphones automatically switch off when inserted into the charging station. To switch off manually, unpair them in the Bluetooth list on your device and hold the multi-function button for 4 seconds. An audible notification will sound when switching off.

Pairing

Remove the earphones from the charging station. The earphones will automatically connect to each other. One of the earphones will be the master and ready for pairing, this is indicated by a blue and white flashing light.
Switch on Bluetooth on your device and search for LAMAX Dots3 Play in the list of available Bluetooth devices. After successful pairing, an audible notification will sound. The LEDs in both earphones will slowly start flashing white.

If you have problems pairing, remove the earphones from the list of paired devices on your phone. Remove the earphones from the charging station. Press the 4× multi-function button on both earphones at the same time. Both earphones will flash blue 3 times. Then insert them into the charging station and pair them as described in step 1.

Charging

Before first use, be sure to remove the color protection film on the charging pins from the inside of both headphones. Then place the headphones in the charging station and charge.
To charge the charging station, plug the cable into the USB-C port on the back of the charging station and plug the other end of the cable into a USB power supply with a maximum input voltage of 5V and current of 2A. When charging, the LEDs on the station will gradually light up according to the state of charge. When fully charged, all 4 LEDs are lit. If the charging station is discharged, only the first diode flashes.
To charge the earphones, insert them into a charged charging station. When charging, the LEDs in the earphones light blue. When fully charged, the LEDs in the earphones go out.

Specifications

Wireless technology	Bluetooth 5.3
Max. pairing distance	up to 15 metres
Supported codecs	AAC, SBC
Earphones battery capacity	50 mAh
Charging station battery capacity	300 mAh
Playback time	up to 8 hours on single charge
Charging time of earphones	1 hour
Charging time of charging station	1,5 hours
Weight of one earphone	3 g
Weight including charging station	34 g