KLIM Unity - Wireless Keyboard and Mouse Set Manual

Special function keys

Introduction

On behalf of the entire KLIM Team, we thank you for purchasing our KLIM Unity wireless keyboard and mouse set. We hope it meets your expectations and that you enjoy using this device.

First use

Take the USB receiver from underneath the mouse and connect it to your computer. Slide the switch behind the keyboard (near the charging port) to the ON position. Slide the switch under the mouse to the ON position.

Charging the keyboard

The battery indicator light at the top-right corner of the keyboard flashes when battery is low. Use the provided cable to connect the keyboard to your computer or a USB charger.

Charging the wireless mouse

Connect the mouse to your computer or a USB charger using the supplied charging cable.

NOTE: You may use the keyboard and mouse while they charge, but the USB receiver must also be connected to your computer for them to work.

The Function Key

The keyboard features a Function key (FN) which can be combined with certain keys to change lighting effects or activatedifferent functions on your computer.

Lighting effects

FN +: Turn the lights on/off

FN +: Increase/decrease light brightness

HINT: decreasing the brightness significantly increases battery life. The keyboard lights turn off after 120 seconds without use to save energy.

Multimedia keys

NOTE: Some function shortcuts are not available on MacOS.

Troubleshooting & Contact

If you ever encounter any problems with the keyboard, remember that we remain at your disposal to help you with any issues. Do not hesitate to contact us at support@klimtechnologies.com for additional support.