Advertisement
SERVICE TIRES SAFELY
SERVICE TIRES SAFELY
Explosive separation of a tire and rim parts can
cause serious injury or death.
Do not attempt to mount a tire unless you have the
proper equipment and experience to perform the job.
Always maintain the correct tire pressure. Do not
inflate the tires above the recommended pressure.
Never weld or heat a wheel and tire assembly.
The heat can cause an increase in air pressure
resulting in a tire explosion.
Welding can structurally weaken or deform the
wheel.
When inflating tires, use a clip-on chuck and
extension hose long enough to allow you to stand
to one side and not in front of or over the tire
assembly. Use a safety cage if available.
Check wheels for low pressure, cuts, bubbles,
damaged rims or missing lug bolts and nuts.
USE PROPER LIFTING EQUIPMENT
USE PROPER LIFTING EQUIPMENT
Lifting heavy components incorrectly can cause
severe injury or machine damage.
Follow recommended procedure for removal and
installation of components in the manual.
DISPOSE OF FLUIDS PROPERLY
DISPOSE OF FLUIDS PROPERLY
Improperly disposing of fluids can harm the
environment and ecology. Before draining any
fluids, find out the proper way to dispose of waste
from your local environmental agency.
Use proper containers when draining fluids. Do not
use food or beverage containers that may mislead
someone into drinking from them.
DO NOT pour oil into the ground, down a drain, or
into a stream, pond, or lake. Observe relevant
environmental protection regulations when
disposing of oil, fuel, coolant, brake fluid, filters,
batteries, and other harmful waste.
1-8
73031GE24
73031GE25
73031GE20
Advertisement
