Gemini GEB12W2 Manual page 4

Single electric blanket
Table of Contents

Advertisement

• Check the blanket carefully before each use.
• If you notice visible damage on the blanket, do not use and return to the
manufacturer or dealer.
• The blanket can only be operated with the controller.
• Before connecting the blanket to the power supply, please ensure that the supply
voltage stated on the rating plate is compatible with your mains supply.
• The blanket may not be operated while folded, creased, wrapped in a cover
or placed around the mattress.
• Four fastening straps are located on the corner of the blanket. Use these
straps to attach the blanket to the mattress using a suitable band or cord.
Make sure that the blanket is firmly strapped to the mattress in both directions
and that it will not crease while it is being used. Check if it is in the correct
position before lying on it.
• During use, the controller switch and cable must not be placed on or under the
blanket or be covered in any way.
• Before using it on an adjustable bed, make sure that the power cable and the
blanket do not get caught in the hinges or get crumpled when making adjust-
ments.
• Neither pierce the blanket with, nor attach safety pins or other spiky or sharp
objects to the pad.
• Particularly do not use the electric under blanket with the infirm, infants or
persons insensitive to heat.
• Not to be used by very young children (0-3 years). Children under the age of
three are not to use this appliance due to their ability to react to overheating.
• Children shall not play with the blanket.
• Cleaning and user maintenance shall not be made by children without super-
vision.
• Never use the blanket unsupervised.
• Prolonged use of the blanket at a high setting could lead to skin burns.
• Never touch a blanket that has fallen into water. Unplug the blanket from the
mains outlet immediately.
• Keep the mains cable away from hot surfaces.
• Never carry, pull or turn the blanket by the mains cable and do not let the
cable get tangled.
• Do not use the blanket when wet and only use it in dry environments
(not in the bathroom or similar environments).
• The controller and cable must not be exposed to any kind of moisture.
• If a fault occurs, do not attempt to repair the blanket by yourself. Repairs must
only be carried out by an authorized specialist dealer or other suitably quali-
fied personnel.
• If the power supply cable is damaged, it may only be replaced by, an author-
ised dealer or by qualified electricians. In order to prevent hazards, always
send the blanket in to the service centre.
4

Advertisement

Table of Contents
loading

Table of Contents