L&L TLR04M-350-500 Installation Instructions Manual
  1. Manuals
  2. Brands
  3. L&L Manuals
  4. Control Unit
  5. TLR04M-350-500
  6. Installation instructions manual

L&L TLR04M-350-500 Installation Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual
INSTALLATION INSTRUCTIONS TLR04M-350-500
Made in Italy
12 ÷ 36 Vdc - 433.92 MHz
CONTROL UNIT FOR RGB LED FIXTURES IN COSTANT CURRENT 350-500 mA (JUMPER SETTING).
POWER SUPPLY IN 12-36VDC. RX RADIO 433 MHZ, 3 PUSH N.O. INPUTS, EXTENDER CONNECTOR AVAILABLE.
TECHNICAL DATA
Power supply
Output
Type of load
N° of programmable transmitters
Radio frequency
IP rate
Working temperature
Dimensions
WARNINGS
•
Installation must be carried out only by qualified technicians in compliance with the electrical and safetystandards in force.
•
All connections must be made with the power turned off.
•
Use suitable cables.
•
Do not cut through the aerial.
•
A suitably sized disconnection device must be set up on the electric power line that supplies the product.
•
Disposal of waste materials must fully respect local standards.
L&L Luce&Light srl / Via Trescalini, 5 / 36031 Dueville, Vicenza / Italy / T +39 0444 36 05 71 / F +39 0444 59 43 04
TLR04M-350-500
Power supply units and control gear
/
Alimentatori ed elettronica di controllo
IP20
12-36 Vdc
3 channels (@ 350/500 mA)
RGB LED with constant current
30
433.920MHz ISM
IP20
-20°C — +55°C
174x46x35 mm
E lucelight@lucelight.it / www.lucelight.it
TLR04M-350-500
1/8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TLR04M-350-500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for L&L TLR04M-350-500

Summary of Contents for L&L TLR04M-350-500

  • Page 1 INSTALLATION INSTRUCTIONS TLR04M-350-500 TLR04M-350-500 Power supply units and control gear Alimentatori ed elettronica di controllo Made in Italy IP20 12 ÷ 36 Vdc - 433.92 MHz TLR04M-350-500 CONTROL UNIT FOR RGB LED FIXTURES IN COSTANT CURRENT 350-500 mA (JUMPER SETTING).

  • Page 2: Connection Diagram

    INSTALLATION INSTRUCTIONS TLR04M-350-500 TLR04M-350-500 CONNECTION DIAGRAM OUT3 BLUE LED OUT2 Loads with constant GREEN LED current (choose a load that’s compatible with the power supply in terms OUT1 of power). RED LED 9 10 11 12 13 14 12 to 36 Vdc...

  • Page 3: Set The Output Current

    INSTALLATION INSTRUCTIONS TLR04M-350-500 TLR04M-350-500 SET THE OUTPUT CURRENT With the jumper is possible to set the current provided to the Leds. The selection is different for each out: OUT3 OUT2 OUT1 JUMPER INSERTED= JUMPER NOT INSERTED= 500mA 350mA L&L Luce&Light srl / Via Trescalini, 5 / 36031 Dueville, Vicenza / Italy / T +39 0444 36 05 71 / F +39 0444 59 43 04...
  • Page 4 INSTALLATION INSTRUCTIONS TLR04M-350-500 TLR04M-350-500 PUSH N.O. USAGE FIXTURES FIXTURES INPUT P1: short pressure INPUT P1: Dimmer up Dimmer up / Dimmer down long pressure Color change refered to a memorized palette (white, light INPUT P2: no actions yellow, light green, dark green, light blue, blue, violet, light...
  • Page 5 INSTALLATION INSTRUCTIONS TLR04M-350-500 TLR04M-350-500 RADIO PROGRAMMING PROCEDURE: STEP 1 STEP 2 Short press on the “SET” key let you A prolonged press on the “SET” key scroll through the menu until “P1” pro- (approx. 3 seconds) takes you into pro- gramming appears on the display.
  • Page 6 INSTALLATION INSTRUCTIONS TLR04M-350-500 TLR04M-350-500 LOAD STATE WHEN THE CONTROL UNIT IS SWITCHED ON Default: Light Off This process is used to set the state of Leds when the control unit is switched on (for example when the power supply is provided by a general switch or timer).

  • Page 7: Factory Setting, Reset

    INSTALLATION INSTRUCTIONS TLR04M-350-500 TLR04M-350-500 FACTORY SETTING, RESET This procedure let you take the control unit back to factory settings. PROCEDURE: STEP 1 Short presses on the “SET” key let you scroll through the menu until “FS” pro- gramming appears on the display.
  • Page 8 INSTALLATION INSTRUCTIONS TLR04M-350-500 TLR04M-350-500 L&L Luce&Light srl / Via Trescalini, 5 / 36031 Dueville, Vicenza / Italy / T +39 0444 36 05 71 / F +39 0444 59 43 04 E lucelight@lucelight.it / www.lucelight.it...

  • Page 9: Dati Tecnici

    ISTRUZIONI DI INSTALLAZIONE TLR04M 350-500 TLR04M-350-500 Power supply units and control gear Alimentatori ed elettronica di controllo Made in Italy IP20 12 ÷ 36 Vdc - 433.92 MHz TLR04M-350-500 CENTRALE DI COMANDO PER LED RGB IN CORRENTE COSTANTE 350-500 mA (JUMPER SU OGNI USCITA).

  • Page 10: Schema Di Collegamento

    ISTRUZIONI DI INSTALLAZIONE TLR04M-350-500 TLR04M-350-500 SCHEMA DI COLLEGAMENTO OUT3 LED BLU OUT2 Carichi corrente LED VERDE costante (scegliere un il carico compatibile con l’ali- mentatore in termini di OUT1 tensione e potenza). LED ROSSO 9 10 11 12 13 14...
  • Page 11 ISTRUZIONI DI INSTALLAZIONE TLR04M-350-500 TLR04M-350-500 SELEZIONE DELLA CORRENTE IN USCITA Con i jumper in scheda è possibile selezionare la corrente con la quale la centrale alimenta il carico. La selezione può essere fatta per ogni uscita separatamente: OUT3 OUT2 OUT1...
  • Page 12 ISTRUZIONI DI INSTALLAZIONE TLR04M-350-500 TLR04M-350-500 UTILIZZO VIA INPUT PULSANTE NA CARICO CARICO SPENTO ACCESO INGRESSO P1: On del carico Off del carico pressione breve INGRESSO P1: Dimmer up intensità Dimmer up intensità / Dimmer down intensità pressione lunga Cambio del colore (bianco, giallo chiaro, verde chiaro, ver-...
  • Page 13 ISTRUZIONI DI INSTALLAZIONE TLR04M-350-500 TLR04M-350-500 PROGRAMMAZIONE RADIO PROCEDURA: PASSO 1 PASSO 2 Con pressioni brevi del tasto “SET” Fare una pressione prolungata del ta- scorrere il menù fino a visualizzare sul sto “SET” (circa 3s) per entrare nella display la programmazione “P1”.
  • Page 14 ISTRUZIONI DI INSTALLAZIONE TLR04M-350-500 TLR04M-350-500 STATO DELLA LUCE ALL’ALIMENTAZIONE DELLA CENTRALE Default: Luce spenta Con questa procedura si imposta lo stato della luce quando la centralina viene alimentata (utile ad esempio se la centrale è alimentata da un interruttore generale o da un orologio a monte).
  • Page 15 ISTRUZIONI DI INSTALLAZIONE TLR04M-350-500 TLR04M-350-500 IMPOSTAZIONI DI FABBRICA, RESET DELLA CENTRALE Con questa procedura è possibile portare la centrale alle impostazioni di fabbrica. PROCEDURA: PASSO 1 Con pressioni brevi del tasto “SET” scorrere il menù fino a visualizzare sul display la programmazione “FS”.
  • Page 16 ISTRUZIONI DI INSTALLAZIONE TLR04M-350-500 TLR04M-350-500 L&L Luce&Light srl / Via Trescalini, 5 / 36031 Dueville, Vicenza / Italy / T +39 0444 36 05 71 / F +39 0444 59 43 04 E lucelight@lucelight.it / www.lucelight.it...

Table of Contents