Table of Contents
Advertisement
Time-setting options
en
OTime-setting options
Y our hob has three timer functions:
T i m e - s e t t i n g o p t i o n s
Programming the cooking time
■
Kitchen timer
■
Stopwatch function
■
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
Select the hotplate and the required heat setting.
1.
Touch the
symbol. The
y
2.
indicator light up in the timer display.
lights up in the display for the hotplate.
y
Within the next 10 seconds, set the required cooking
3.
time in the settings range.
Touch the
symbol to confirm the selected setting.
y
4.
The cooking time begins to elapse.
Notes
The same cooking time can be set automatically for
■
all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically
programming the cooking time in section ~ "Basic
settings"
If the flexible cooking zone is selected as the only
■
hotplate, the set time for the entire cooking zone is
the same.
If the Move function is selected for the combined
■
hotplate, the set time for the three hotplates is the
same.
16
symbol and the
‹‹
V
Frying sensor
If a cooking time has been programmed for a hotplate
and the frying sensor has been activated, the cooking
time will not begin to count down until the selected
temperature setting has been reached.
Changing or deleting the time
Select the hotplate and then touch the
Change the cooking time in the settings range or set
to delete the programmed cooking time.
‹‹
Touch the
symbol to confirm the selected setting.
y
When the time has elapsed
The hotplate switches off, the
the hotplate switches to the
signal sounds.
and the
indicator flash in the timer display.
‹‹
V
When the
y
symbol is touched, the indicators go out
and the acoustic signal ceases.
Notes
To set a cooking time of under 10 minutes, always
■
touch 0 before you select the required value.
If a cooking time was programmed for several
■
hotplates, the time information for the selected
hotplate is shown in the timer display.
Select the relevant hotplate to call up the remaining
■
cooking time.
You can set a cooking time of up to
■
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
Touch the
symbol. The
t
1.
indicator light up in the timer display.
Select the required time on the control panel and
2.
touch the
symbol to confirm.
t
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the
symbol.
Y
Change the cooking time in the settings range or set
to delete the programmed cooking time.
‹‹
Touch the
symbol to confirm the selected setting.
Y
When the time has elapsed
An audible signal sounds once the time has elapsed.
and the
symbol flash in the timer display.
‹‹
V
The indicators go out after touching the
symbol.
y
display flashes and
y
heat setting. An audible
‹‹
minutes.
ŠŠ
symbol and the
‹‹
V
symbol.
t
Advertisement
Table of Contents
