Removal steps of the camera card
Step
Screw (quantity)
1
M 2 ×2.5 mm, flat-head, nylon-coated (2)
4060 Antenna kit
For access, remove these FRUs in order:
• "4010 LCD strip cover and LCD bezel assembly" on page 124
• "4020 LCD panel and LCD cable" on page 125
Removal steps of the antenna kit and LCD rear cover assembly
Cable routing:
When you install the antenna kit, route the cables as shown in the following illustration.
132
P15 Gen 2, T15g Gen 2, and P17 Gen 2 Hardware Maintenance Manual
Torque
Color
Black
0.181 Nm
(1.85 kgf-cm)