Advertisement
Quick Links
Operating instructions
Bike Repair Stand
60280
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Related Manuals for WilTec 60280
Summary of Contents for WilTec 60280
- Page 1 Operating instructions Bike Repair Stand 60280 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 12. and 13. Adjust the length of the balance pole. Then attach two rubber straps to the handle- bars/bicycle and to the vertical tubes. © by WilTec Wildanger Technik GmbH Item 60280 Page 3 http://www.wiltec.de...
- Page 4 Letter Name/explanation Open Closed Open Closed Insert Do not exceed the recess of the max. length. Open Closed © by WilTec Wildanger Technik GmbH Item 60280 Page 4 http://www.wiltec.de 10 2023-1...
- Page 5 Tighten Open Closed Open Tighten Important note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 60280 Page 5 http://www.wiltec.de 10 2023-1...