Advertisement
Quick Links
Wireless Inductive Charging Case w/ Security Lock
CONTENTS:
A
INSTALLATION:
1. Inserting Tablet into Enclosure
F
Peel the external silicone sleeve
from the internal hard case using
component (F).
Once the tablet device is inside, plug
the charging cable into the power
socket. Then place the internal front
(hard) cover on top of the case, and
gently clip all four sides shut.
PAD-SICCB
INSTALLATION - MANUAL
B
A
To open case, apply gentle pressure to
the small clips (noted on the diagram by
arrows). The internal hard case will
open when all four sides are unclipped.
Tighten the anti-theft screw with
the included star key (C) if you
want the case security.
C
D
D
Reinstall the external silicone
888-733-4448
E
X2
X1
E
F
Insert the iPad into the back
portion of the hard cover.
rubber sleeve.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CTA PAD-SICCB
Summary of Contents for CTA PAD-SICCB
- Page 1 Wireless Inductive Charging Case w/ Security Lock PAD-SICCB INSTALLATION - MANUAL CONTENTS: INSTALLATION: 1. Inserting Tablet into Enclosure Peel the external silicone sleeve To open case, apply gentle pressure to Insert the iPad into the back from the internal hard case using the small clips (noted on the diagram by portion of the hard cover.
- Page 2 2. Setting the Cover in Tabletop or Handheld Mode 1. Locate kickstand at case (A) rear and fold out underneath strap. 2. Display tablet at desired viewing angle. 3. Press kickstand in to return to handheld mode. 3. Charging the Tablet Device Connect the AC/DC power supply to the charging plate as shown above.
- Page 3 5. Key & Lock Security Option 5A. Easily Click-in Cable lock (D) into security hub to secure device. 5B. To release cable-lock insert provided Key (E) into lock cable (D) and turn it clockwise then take out the cable lock. 6.
Need help?
Do you have a question about the PAD-SICCB and is the answer not in the manual?
Questions and answers