Removal steps of the speaker assembly
Release antenna and LVDS cables from the cable guide, loosen four screws
Step
Screw (quantity)
1
M2 × 3mm, big head, nylon-coated (4)
Attention: As you route the cables, ensure that they are not subject to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
1130 LCD unit and DC-in cable
For access, remove this FRU:
•
"1010 External battery pack" on page 54
•
"1020 Keyboard" on page 54
•
"1030 Optical disk drive" on page 56
•
"1040 Base cover assembly" on page 57
•
"1050 Hard disk drive or solid-state hybrid drive" on page 58
•
"1060 Wireless-LAN /Bluetooth card" on page 60
•
"1080 Upper case" on page 62
• "1090 Audio board, audio board cable, power board, touch pad board cable, finger printer board and
LED board" on page 63
•
"1100 System board" on page 66
•
"1120 Speaker assembly" on page 70
All manuals and user guides at all-guides.com
a
a
b
1
and remove the speakers
a
a
b
Color
Black
.
Chapter 10
Removing or replacing a FRU
2
.
Torque
1.0– 1.5 kgfcm
71