Differential Gear Oil - Yamaha YXR7FD Owner's Manual

9. Install the final gear case guard by install-
ing the bolts and the collars, and then
tightening the bolts to the specified
torque.
Tightening torque:
Final gear case guard bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
5B410014

Differential gear oil

Checking the differential gear oil level
1. Park the vehicle on a level surface.
2. Remove the differential gear oil filler bolt
and its gasket, and then check the oil lev-
el. It should be up to the brim of the filler
hole.
3. If the level is low, add sufficient oil of the
recommended type to raise it to the spec-
ified level. NOTICE: Be sure no foreign
material enters the differential gear
case.
8-18