Table of Contents
Advertisement
12. Move cursor to focus on the setting you want
to make change and press Enter to select a fit
value. When the configuration is accepted,
press Enter on the OK field to exit the screen.
Back to step 11.
13. Select "Novell Netware Server" as the network
server you will attach to and press Enter key.
14. Installation program starts copying related files
from diskette to the destination directory and
modifies AUTOEXEC.BAT and NET.CFG under
user's agreement.
15. Installation is complete. Please reboot the
computer to have the driver take effect.
Installation for Netware DOS ODI Driver
Automatic Installation
1.
Run INSTALL.EXE from driver diskette's root
directory.
2.
Select "Netware 3.x or 4.x workstation" in
"Network Operating System" screen and enter
"Driver Install" screen.
3.
If current settings are acceptable, select "Start
Installation" and go to step 5. Otherwise, select
"Modify Parameters" to make settings changed.
4.
Move cursor to focus on the setting you want
to make change and press Enter to select a fit
value. When the configuration is acceptable,
press Enter on the OK field to exit the screen.
Back to step 3.
5.
Installation program starts copying related files
- 15 -
Advertisement
Table of Contents
