Accident Prevention; Safety In Maintenance - Jolly V12 Use And Maintenance Manual

USE
Connect the extension cable crocodiles to the battery respecting the polarity
-
-
Extend the rod to the desired length and lock it see (tele rod adjustment)
Press the button on the head avoiding to keep it on the moving part
-
TELESCOPIC ROD ADJUSTMENT
-
Hold the lower part of the shaft locked with one hand (F) fig. 2
-
Open the rod locking lever (H) as (Fig. 3)
- Extend the rod (G) to the desired position
Lock the rod with the locking lever (H) as (Fig. 4)
-

ACCIDENT PREVENTION

Use the tool only from the ground in safe conditions
-
Use a protection equipment suitble for the operations; use safety glasses and verify that clothing is
-
close to the body. Avoid wearing ties, necklaces, belts or loose hair that could get caught or slipped
between moving organisms
- Use shoes with non-slip sole and gloves. (Fig 2)
Is required to wear ear muffs
-
- A person under the influence of alcohol or drugs that reduce alertness is not hallowed to use the
machine or perform maintenance or repair
- Entrust the tool only to people how know the instructions for use or who have been trained by
authorized persons
Keep the machine away from children and animals
-
Tampering with the safety devices is prohibited
-
The user is responsable for any danger or accident to other people or their property.
-
Do not use the machine when you are in precarious balance
-
Do not use the machine when you are on a ladder
-
Use the machine only to pick olives, coffe, almonds and pistachios
-
D.P.I. PROVIDED
Gloves and glasses are necessary

SAFETY IN MAINTENANCE

- Before doing maintenance make sure that the power supply is disconnected
- Maintenance operations must be done by qualified staff
- At the end of the maintenance and repair, before restarting the machine, the technical manager
must ensure that the work has been completed, the safety devices and the protections have been
restored
- During maintenance operations you must use protective clothing as:
Gloves
Adjustments with safety devices disconnected or without casing must be done by a singol operator;
During these operations it is forbidden to access the machine to someone not authorized.
Avoids deposits of dust on the machine, on the electric die and on the extraction holes.
Helmet Hearing protection
anti-slip and anti-crushing shoes