Summary of Contents for Hot Screen Hot 1000e
- Page 1 Hot 1000e Version 1.0 ORIGINAL USER MANUAL READ DIGITALLY Please read the complete instructions Scan to read the user of use before using the machine. manual digitally.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Preface ..................................3 It is our sincere hope and belief that you will be satisfied with your new Hot 1000e heat EC declaration of conformity ........................... 4 press, and that you will enjoy using it. The heat press is designed and manufactured with Safety instructions .............................. -
Page 3: Ec Declaration Of Conformity
EN ISO 13849-1:2016 Safety of machinery - Control systems - Safety-related parts of control systems - Part 1: General principles of design Never use the Hot 1000e if the cord or plug is damaged. Do not use it if water is spilled on the machine. Contact our heat press customer support for troubleshooting and repairs. -
Page 4: Risk Of Injury
Hot Screen's heat transfers are tested by test organizations and emit no dan- The Hot 1000e heat press must be lifted with a pallet jack or forklift. When manually lifting the Hot gerous gases (scan the QR code below to view the test report). Only textiles that are approved for decal 1000e heat press, at least two people are required. -
Page 5: Installation
The machine is specially developed for Hot Screen’s heat transfers, but it works as designed when using heat transfers from other producers as long as the settings are within the specifications for the machine. - Page 6 Thread the garment onto the bottom plate and place the heat transfer. The garment is now ready. the heat transfer in the desired position. 4. SLIDE BACK THE BASE PLATE Slide the bottom plate to the end position. © HOT SCREEN AB © HOT SCREEN AB...
-
Page 7: Configuration
In order for the setting you configured to be saved, a full time cycle must elapse. In order for the setting you configured to be saved, a full time cycle must elapse. © HOT SCREEN AB © HOT SCREEN AB... -
Page 8: Time Configuration Menu
In order for the setting you configured to be saved, a full time cycle must elapse. In order for the setting you configured to be saved, a full time cycle must elapse. © HOT SCREEN AB © HOT SCREEN AB... -
Page 9: Counter Reset Menu
If you press “Yes” using the up arrow, you reset the counter and the menu returns to the operating position and the counter shows “0000”. When the menu returns the operations menu, the reset counter will appear on the display. © HOT SCREEN AB © HOT SCREEN AB... -
Page 10: Troubleshooting
GENERAL TROUBLESHOOTING - MACHINE DOES NOT START Do the following if your Hot 2000 does not start. Check that the switch on the Hot 1000e heat press is in the “1” position. If the display is not lit when the switch is in the “1” position, check that socket is powered. -
Page 11: Accessories
The cover also prevents glue from sticking to the surface Specifications during application. Width: 120cm Fits both Hot 1000e & Hot 4000. Length: 60cm Dimensions: 10 x 15cm. QR CODE Height: 89. cm QR CODE... -
Page 12: Delivery
Scan to order Hot Screen AB in Fjärås, which is responsible for any statutory re- cycling, will accept the used heat press if there is no local solution. © HOT SCREEN AB © HOT SCREEN AB... - Page 13 Gunnesgårdsvägen 2, 439 74 Fjärås, Sweden Tel: +46300-56 89 90 • E-mail: info@hotscreen.se hotscreen.se...
Need help?
Do you have a question about the Hot 1000e and is the answer not in the manual?
Questions and answers