Advertisement
Quick Links
70:30 Integrated Fridge Freezer
TA52002
Generic instructions, (To be used in conjunction with User Instructions).
l Please read this Installation Manual to ensure safe fitting and use of the appliance.
l The appliance should be fitted by a suitably competent and qualified person.
l Please keep these instructions in a safe place for future reference.
l Danger of suffocation keep packaging material away from children.
Installation Instructions
ISSUE v2.1 160522
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lamona TA52002
Summary of Contents for Lamona TA52002
- Page 1 70:30 Integrated Fridge Freezer TA52002 Generic instructions, (To be used in conjunction with User Instructions). l Please read this Installation Manual to ensure safe fitting and use of the appliance. l The appliance should be fitted by a suitably competent and qualified person.
- Page 2 Installation overview guide Establish power socket location, (must be accessible after installation) Prepare cabinet, (remove back panels, fit upper shelf, fit plinth vent) ... . .p.5 Fit and adjust décor doors ........p.5 Reverse fridge freezer doors if necessary .
-
Page 3: Safety Information
Safety Information Two person lift. Fridge freezer must Do not install a be fixed securely damaged appliance. and level. WARNING! This appliance must be earthed. The electric socket must be accessible after fitting. NOTE: If the electricity Risk of injury: cable is damaged it Beware of metal WARNING! - Page 4 Installation Parts supplied - PLEASE RETAIN, DO NOT THROW AWAY! Remove parts bags from salad crisper drawer. BAG 1 BAG 2 Top trim x1 Spacer bracket x3 Top trim adhesive strip x1 (3.9x13 FH) x2 (3.5x13) x3 (T25x18) x6 BAG 3 BAG 4 RH hinge Door slider x4...
- Page 5 Cabinet pre-build and airflow THE CABINET WILL NEED MODIFYING BEFORE INSTALLING IMPORTANT: Good airflow around the fridge freezer is YOUR FRIDGE FREEZER. essential for optimum performance 1. Remove rear panels. 2. Attach feet. and energy saving. Ventilation channels must 3. Fit and align doors. 4.
- Page 6 Reversing door opening If the appliance doors need reversing, DO IT NOW. - Remove plastic - Remove hinge 1 , door 2 - Fit hinge 1 in new position and lower hinge 3 . and place washer. cover caps. Remove door fittings, (lift upwards and away).
- Page 7 - Fit door 5 . - Fit hinge 6 in new position. WARNING: Support door when fitting hinge 6 . - Fit door 2 . - Fit hinge 3 in new position. - Replace plastic cover caps. Replace door fittings. WARNING: Support door when fitting...
- Page 8 Fit top trim, (BAG 1) - Cut indicated 3mm off each end of the top trim and chamfer inwards. - Apply the self adhesive strip to the underside - Align the top trim to the non hinge side of the fridge of the top trim and cut to length.
- Page 9 Fit side seal trim - Remove the following screw hole covers and plugs - Loosely attach two spacer brackets. and keep in safe place for future use. plug x1 cover x1 plug x1 Remove screw hole cover x1 Remove screw hole plugs x5 plugs plugs...
- Page 10 Inserting into cabinet - Protect areas with masking tape. - Carefully lift the fridge freezer into the cabinet; rear feet onto base, level and gently slide into position. - Upon installation the fridge freezer should be leaning - Open doors, turn adjustable feet so that the fridge slightly forward, this is quite normal.
- Page 11 Securing the fridge freezer (Vertically true and level in cabinet.) Mid spacer - The fridge freezer should be set back 42mm from the front edge of the cabinet, the spacer brackets will set the appliance to the correct depth. Carefully move appliance bracket fitting, and adjust feet to obtain the correct alignment.
- Page 12 Top hinge - Remove screw and retain. (RH hinge side bracket illustrated.) side bracket, (BAG 3) - Fit top hinge side bracket. - Once spacing is correct, attach to the DO NOT fully tighten at this stage. cabinet side. Select the correct hinge side bracket.
- Page 13 Door slider fitting, (BAG 4) - Punch or pilot drill the pre-marked holes on the fridge freezer doors. - Fix the slider retainers to the fridge freezer doors. (3.9x13 FH) x8 - Locate slider into the retainer and align with décor - Mark, pilot and fix slider to décor door.
- Page 14 Fixing bracket trims - Insert cover trims over screw holes, (BAG - Carefully snap off the distance spacing tabs, (if necessary for finish; remove bracket and trim). Clip centre in first then the ends. Cover trims x3 - Present hinge covers at 45°, then rotate to fit over - Insert cover trims over screw holes, (BAG the fridge freezer door hinges,...
- Page 15 Plinth vent Fit a plinth vent for good airflow around the fridge freezer, see Kitchen Installation Manual for fitting instructions. Exclusive to Howdens...
- Page 16 Product serial number (Place sticker here) REPRISE À DÉPOSER À DÉPOSER À LA LIVRAISON EN MAGASIN EN DÉCHÈTERIE Cet appareil se recycle Points de collecte sur www.quefairedemesdechets.fr Privilégiez la répara�on ou le don de votre appareil! Product information correct at the time of publication in January 2021. The company has a policy of continuous product development and Howden Joinery Ltd.
Need help?
Do you have a question about the TA52002 and is the answer not in the manual?
Questions and answers