Honda ACCORD Hybrid 2021 Owner's Manual page 447

■
Blind spot information system on and off
Left Selector
Wheel
Safety Support Switch
* Not available on all models
When you turn the blind spot information
system on and off, do the following.
1. Press the safety support switch.
2. Roll the left selector wheel to the
and push it.
The blind spot information system is in the
previously selected ON or OFF setting each
time you start the power system.
uuWhen DrivinguBlind spot information System
1Blind spot information System
Blind spot information system may be adversely
affected when:
•
Objects (guard rails, poles, trees, etc,.) are
detected.
symbol
•
An object that does not reflect radio waves well,
such as a motorcycle, is in the alert zone.
•
Driving on a curved road.
•
A vehicle is moving from a far lane to the adjacent
lane.
•
The system picks up external electrical interference.
•
The rear bumper or the sensors have been
improperly repaired or the rear bumper has been
deformed.
•
The orientation of the sensors has been changed.
•
In bad weather (Heavy rain, snow, and fog).
•
Making a turn at an intersection.
•
Driving on a bumpy road.
•
Making a short turn that slightly tilts the vehicle.
For a proper blind spot information system operation:
•
Always keep the rear bumper corner area clean.
•
Do not cover the rear bumper corner area with
labels or stickers of any kind.
•
Take your vehicle to a dealer if you need the rear
bumper corner area or the radar sensors to be
repaired, or the rear bumper corner area is strongly
impacted.
*
*
445