Table of Contents
Advertisement
Quick Links
• Please read this manual
• Please read this manual
and save it with your original
and save it with your original
sales receipt.
sales receipt.
• Tool needed for assembly:
• Tool needed for assembly:
Phillips Screwdriver
Phillips Screwdriver
(not included).
(not included).
• Use only with the included
• Use only with the included
Power Wheels
Power Wheels
® ®
12 Volt Lead-
12 Volt Lead-
Acid Rechargeable, Battery
Acid Rechargeable, Battery
with Built-in Thermal Fuse
with Built-in Thermal Fuse
and a Power Wheels
and a Power Wheels
® ®
12 Volt Charger with type 12V
12 Volt Charger with type 12V
connector (both included).
connector (both included).
• Requires four "C" (LR14)
• Requires four "C" (LR14)
alkaline batteries for FM
alkaline
batteries for FM
Radio operation (not included).
Radio operation (not included).
Owner's Manual
with Assembly Instructions
For Model M9779
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fisher-Price Craftsman POWER WHEELS Monster Traction M9779
Summary of Contents for Fisher-Price Craftsman POWER WHEELS Monster Traction M9779
- Page 1 • Please read this manual • Please read this manual and save it with your original and save it with your original sales receipt. sales receipt. • Tool needed for assembly: • Tool needed for assembly: Phillips Screwdriver Phillips Screwdriver (not included).
-
Page 2: Table Of Contents
300 authorized service centers nationwide. Our • Use this vehicle ONLY outdoors. Most interior flooring can be authorized service centers will repair or replace parts under damaged by riding this vehicle indoors. Fisher-Price ® will not be warranty at no extra charge, and can perform non-warranty responsible for damage to the floor if the vehicle is used indoors. -
Page 3: Warnings And Cautions
ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury. -
Page 4: Parts
PARTS • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. •... - Page 5 Steering Wheel Steering Wheel Cover 12 Volt Charger 12 Volt Battery Steering Column 2 Hubcaps Steering Column Cap Part Not Shown: Label Sheet .25" x 2.85" Pin - 1 #8 x " Screw - 19 Wire Clip - 2 Fasteners Shown Actual Size For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver.
-
Page 6: Parts Picture
PARTS PICTURE Note: Some parts shown are assembled to both sides of the vehicle. Vehicle Hood Steering Column Parts Not Shown Cargo Bed Long Seat Belt .25 x 2.85" Pin Label Sheet 2 Hubcaps 2 Short Seat Belts Steering Column Cap #8 x "... -
Page 7: Battery Charging
BATTERY CHARGING ELECTRICAL HAZARD About Thermal Fuses WARNING Your Power Wheels ® 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resetting safety device which • Battery can fall out and injure a child if automatically “trips”... -
Page 8: Assembly
ASSEMBLY Power Indicator WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. - Page 9 Screws Front Grille DASH VIEW TOP VIEW • Before applying the labels, wipe the surface of the vehicle with • Insert four screws into the top of the front grille and tighten. a clean, dry cloth to remove any dust or oils. Hint: You may need to push the ends of the front grille to insert and •...
- Page 10 Steering Column .25" x 2.85" Pin • Align the hole in the steering wheel with the hole in the steering column. • Insert the .25" x 2.85" pin all the way through the hole in the side • Insert the end of the steering column down through the opening in of the steering wheel and into the steering column, as shown.
- Page 11 Screws Cargo Bed SIDE VIEW • Fit the cargo bed onto the back of the vehicle as shown. The four tabs on the cargo bed should fit into slots in the vehicle. BOTTOM VIEW • Carefully turn the vehicle over. •...
- Page 12 Screws Screw • Insert a screw through the large opening in the steering column cap and the hole in the steering column. Tighten the screw. • Fit the pegs on the underside of the grille support into the receptacles on the vehicle. •...
- Page 13 CORRECT • Position the wire clip so that the wavy side is out. • Insert the straight side of the clip through the hole in the axle. INCORRECT • Slide the clip so that the straight end goes through the other hole in the axle.
- Page 14 Seat Slots Hubcap • Align the tabs on a hubcap with the slots in a rear wheel. “Snap” a hubcap into the center of the rear wheel. Hint: If the hubcap does not "snap" into place, you may not have assembled the wire clip properly.
- Page 15 Screws Screws TOP VIEW • Insert two screws into the tabs on the front edge of the seat and tighten. FRONT VIEW • Fit the long tabs on the hood into the slots in the front end of the vehicle. •...
- Page 16 1.5V x 4 "C" (LR14) Battery Safety Information In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
-
Page 17: Decoration
DECORATION • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applied to the vehicle. •... -
Page 18: Battery Installation
BATTERY INSTALLATION IMPORTANT! Use only a Power Wheels ® 12 volt lead-acid rechargeable battery with built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ®... -
Page 19: Battery Care And Disposal
BATTERY CARE AND DISPOSAL Disposal Care If a battery leak develops, avoid contact with the leaking acid and • Your Power Wheels ® battery is a non-spillable, sealed lead-acid place the damaged battery in a plastic bag. See information below battery. -
Page 20: Safe Driving Rules
SAFE DRIVING RULES Teach Safety Rules to Children RIDING HAZARD While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still WARNING very immature. Unsupervised driving by children can lead to serious injury. -
Page 21: Vehicle Operation
VEHICLE OPERATION As assembled, your vehicle is ready to roll in low speed (2 mph, maximum). After your child has mastered the basic skills of driving and understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow the vehicle to operate in low or high speed. See the instructions on this page to remove the high speed lock-out screw. -
Page 22: Charge Indicator
CHARGE INDICATOR CARGO BED Button 12 VOLT BATTERY CHARGE INDICATOR • Lift and lower the tailgate to open. • Press the 12 volt battery charge indicator button to check the • To close the tailgate, lift and lower it back in place. power level of your battery: Note: Cargo bed weight limit is 25 lbs (11.3 kg). -
Page 23: Problems And Solutions Guide
PROBLEMS AND SOLUTIONS IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels Consumer Relations, toll-free at 1-800-348-0751 between 9 AM - 7 PM (EST) Monday through Friday ®... - Page 24 PROBLEM POSSIBLE CAUSE SOLUTION Vehicle was running but Loose wire or loose connectors Check all wires and connectors. Make sure the motor harness suddenly stopped connector is plugged into the battery, and that there are no loose wires around the motors. Tripped thermal fuse The built-in thermal fuse may "trip"...
- Page 25 PROBLEM POSSIBLE CAUSE SOLUTION Vehicle runs sluggishly Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 14 hours after each use.
- Page 26 PROBLEM POSSIBLE CAUSE SOLUTION ® Loud clacking or grinding noise Broken gears Contact your local Power Wheels authorized service center for from a motor-gearbox diagnosis and repair. Charger gets warm during use It is normal for some chargers to get No action required.
-
Page 27: Fcc Statement
FCC STATEMENT LIMITED WARRANTY (United States Only) Bumper-to-Bumper* This equipment has been tested and found to comply with the limits Limited Warranty for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against One year limited warranty from the date of purchase harmful interference in a residential installation. - Page 28 Manufactured by Fisher-Price, Inc., a subsidiary of Mattel, Inc. www.ford.com "Craftsman" is a registered trademark of Sears Brands, LLC © 2007 Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A. ©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Need help?
Do you have a question about the Craftsman POWER WHEELS Monster Traction M9779 and is the answer not in the manual?
Questions and answers