LG 42LF55 Series Owner's Manual page 21

1
2
3
4
5
6
1 Use a drill bit Ø8 mm to drill a hole for the anchor location within a
depth of 80 mm - 100 mm.
2 Clean the drilled hole.
3 Insert the sealed anchor to the hole. (When inserting the anchor,
use a hammer.)
4 Set the wall mount on the wall by aligning to the location of the
hole. and, set the angle adjusting part to face upward.
5 Align the wall mount bolt to the hole and tighten it. Then, fasten the
bolts at torque of 45 kgf/cm - 60 kgf/cm.
Connections (notifications)
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device's
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
• The external device connection may differ from the model.
• Connect external devices to the TV regardless of the order of the
Wall mount anchor
TV port.
• If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.
• Refer to the external equipment's manual for operating
instructions.
• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
Wall mount screw
• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
Antenna Booster
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
NOTE
• This feature improves the sensitivity to weak RF Signal
in poor reception areas. LG's built-in booster is auto-
activated at weak signal level. It strengthens signal level
and minimizes picture colour noise.
• This feature is auto-controlled by processor and no user
intervention required.
13