Technical Data; Disposal - BOMANN HBB 6025 CB Instruction Manual

CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use abrasive or aggressive cleaners.
Housing
Only use a slightly damp cloth to clean the outside of the
appliance.
Balloon Body
You may wipe the balloon body with a damp cloth.
Accessories
The accessories can be cleaned by rinsing with warm
water. Allow the accessories to dry before reassembling the
appliance.
Troubleshooting
Problem Possible cause
The appli- The appliance has
ance does no power supply.
not function.
The appliance is
faulty.
The garment The garment is
takes too very thick.
long to dry.
The garment was
not dry enough.
The zippers are not
fully closed.
The The inlet or outlet
appliance openings are
stops during covered.
operation.
The timer is
expired.
Your appliance is
equipped with a
safety switch. It will
block the motor
when overloaded.
HBB6025CB_IM
Model:............................................................... HBB 6025 CB
Power supply:..................................... 220 - 240 V~, 50 / 60 Hz
Power consumption: .....................................................850 W
Protection class: ...................................................................
Net weight: ....................................................... approx. 1.5 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibil-
ity and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Meaning of the "Dustbin" Symbol
Solution
Test the socket with
another appliance.
Plug in the mains
This helps avoid the potential effects of incorrect disposal
plug correctly.
on the environment and human health.
Check the main
This will contribute to the recycling and other forms of re-uti-
circuit breaker.
lisation of electrical and electronic equipment.
Contact our service
centre or a spe- Information concerning where the equipment can be dis-
cialist. posed of can be obtained from your local authority.
Repeat the proce-
dure.
Allow it to drain first.
Close the zippers.
Be sure that the inlet
or outlet openings
are unobstructed.
Set the timer again.
Disconnect the
mains plug from the
socket.
Allow the appliance
to cool down before
restarting it.

Technical Data

Disposal

Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
29
06.11.18