Table of Contents
Advertisement
Section 8 Hang or wall mount
Explosion hazard. Installation of the instrument into hazardous locations must be done so that no
friction can be generated between the instrument and any surrounding surfaces.
The instrument is for fixed installation. Keep direct airflow away from the instrument, which can cause
an electrical charge transfer.
To hang the field transmitter, attach the crossbeam clamps to the field transmitter. Refer to the
illustrated steps in
Figure
To attach the field transmitter to a wall or DIN rail, attach the wall mount bracket to the field
transmitter. Refer to
Accessories
supplied with the wall mount bracket.
D A N G E R
6. Refer to
Accessories
on page 19 for ordering information. Installation instructions are
on page 19 for ordering information.
English 17
Advertisement
Table of Contents
