Searching For Digital Terrestrial Tv Channels Manually - Grundig 37 VLE 9270 BL Manual

speCiAl­settinGs
6 Select the line »Scan Typ« with »
and set the option »DTV« with »
7 Start the scan with »
– A ll channel and favourites lists will be
d eleted and compiled anew.
note:
After starting the scan, a security query will
7
appear. Press »

option »Yes«.
– T he »Reults« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– T he scan is complete as soon as the
» PROGRAM TABLE« appears.
note:
You can abort the search by pressing
7
»menu«.
8 Press »menu« to end the setting.
Automatic­service­update­
If this function is activated, possible changes of
network operators are updated automatically.
The unit must be located in stand-by mode.
1 Open the menu with »menu«.
2 Select the line »SOURCE SETUP« with »
or » « and press »oK« to confirm.
Λ
3 Select the line »Automatic Service Update«
with » « or » «.
v Λ
4 Select the automatic update with »
(»On«).
5 Press »menu« to end setting.
­ - ---------------------------------------------------------------------------------------------------------
« or »
v
< >
« or » «.
« (red).

« (green) to confirm the
v
<
« or »
«
searching­for­digital­terrestrial­
Λ
tv­channels­manually
1 Open the menu with »menu«.
2 Select the line »SOURCE SETUP« with »
or » « and press »oK« to confirm.
Λ
– T he »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »oK« to confirm.
Select the option »Air« with »
» « and press »oK« to confirm.
Λ
Caution:
The antenna power supply (line »Active
7
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
4 Select the »Active Antenna Power«« with
» « or »
v Λ
er supply for the antenna with »
(»On«).
5 Select » Digital Manual Tuning« with »
» « and press »oK« to confirm.
Λ
– T he menu appears.
«
6 Enter the channel number directly with
» « and press »oK« to confirm.
1­...­0
– A fter the search is complete, the channels
found are displayed in the »Results« menu.
>
«
7 Press »menu« to finish the setting.
v
< >
«, »
«. Switch on the antenna pow-
ENGLISH
«
v
« or » «
Λ
«, » « or
v
< >
« or » «
« or
v
­ 7 5