Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ICT Manuals
  4. Dimmer
  5. 2AMDI511VPVRDBS
  6. User manual

ICT 2AMDI511VPVRDBS User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
USER MANUAL 2AMDI511VPVRDBS
SUBJECT INDEX:
DESCRIPTION
TECHNICAL SPECIFICATION
DEVICE POWER SUPPLY AND CONNECTION TO THE LED MODULE
OPERATION MODES
LINEAR POTENTIOMETER MODE 100KOHM
MODE 0-10V/1-10V (NOT ISOLATED) PASSIVE
PUSH MODE
DALI MODE
BLUETOOTH MODE + PUSH
PARAMETERS CONFIGURATION
1
IOTLIGHT - User Manual 2AMDI511VPVRDBS

Advertisement

loading
Need help?

Need help?

Do you have a question about the 2AMDI511VPVRDBS and is the answer not in the manual?

Questions and answers

Summary of Contents for ICT 2AMDI511VPVRDBS

  • Page 1 SUBJECT INDEX: DESCRIPTION TECHNICAL SPECIFICATION DEVICE POWER SUPPLY AND CONNECTION TO THE LED MODULE OPERATION MODES LINEAR POTENTIOMETER MODE 100KOHM MODE 0-10V/1-10V (NOT ISOLATED) PASSIVE PUSH MODE DALI MODE BLUETOOTH MODE + PUSH PARAMETERS CONFIGURATION IOTLIGHT - User Manual 2AMDI511VPVRDBS...
  • Page 2 - Protection Class: IP20. - Weight: 44 gr. - Standard Dimension 40x80x24.45 mm. - Dimension with accessories 40x100x24.45 mm. - Reverse polarity protection. - Open circuit protection. - Surge voltage protection. - Over temperature protection. IOTLIGHT - User Manual 2AMDI511VPVRDBS...
  • Page 3 - If the control voltage of the PUSH input is higher than the SELV voltage it is necessary to use the OPTIONAL terminal / cable cover to keep the product in CLASS II. - Use only in dry conditions. IOTLIGHT - User Manual 2AMDI511VPVRDBS...
  • Page 4 DIMENSION VOLTAGE CURRENT CHANNELS POWER INPUTS 2AMDI511VPVRDBS 8-53V DC 576W at 48V DC Insulated Push button x1 40x80 DALI x1 h 24.45 Linear Potentiometer 100K x1 0-10V Passive x1 1-10V Passive x1 Bluetooth LE x1 IOTLIGHT - User Manual 2AMDI511VPVRDBS...
  • Page 5 DEVICE POWER SUPPLY AND CONNECTION TO THE LED MODULE POWER SUPPLY CONNECTION DIAGRAM AND LED 2AMDI511VPVRDBS - FIGURE N. 1 The 2AMDI511VPVRDBS dimmer has to be powered according to the polarity showed in FIG. 1 through the DC IN (+ and -) terminals.

  • Page 6: Operation Modes

    OPERATION MODES LINEAR POTENTIOMETER MODE 100KOHM POTENTIOMETER WIRING 2AMDI511VPVRDBS - FIGURE N. 2 In order to activate this mode of control/operation just connect a linear potentiometer of 100 Kohm between the D+ and D- inputs and disconnect the remaining inputs.
  • Page 7 MODE 0-10V/1-10V (NOT ISOLATED) PASSIVE WIRING 0-10V 2AMDI511VPVRDBS - FIGURE N. 3 In order to activate this mode of control/operation just connect the active control signal of 0-10V/1-10V between the D+ and D- inputs (being careful to observe the correct polarity) and disconnect the remaining control signals.

  • Page 8: Push Mode

    PUSH MODE WIRING BUTTON 2AMDI511VPVRDBS - FIGURE N. 4 In order to activate this mode of control/operation it is necessary to remove any control signals from the D + and D- inputs and connect between the DALI/P1 and DALI/P2 inputs, a signal in direct or alternating voltage (DC voltage range:10÷265V, AC 12÷265Vac 50÷65Hz) interrupted by a normally open button (N.O.).
  • Page 9 DALI MODE DALI 2AMDI511VPVRDBS WIRING - FIGURE N. 5 In order to activate this mode of control/operation it is necessary to shortcircuit the D+ and D- inputs and connect the DALI bus between the DALI/P1 and DALI/P2 inputs. On the first reception of a properly formatted DALI package the dimmer is configured in DALI mode. Once configured in DALI mode and disconnected from the DALI bus the dimmer switches to the POWER ON LEVEL mode set through DALI bus.
  • Page 10 QUERY MIN LEVEL QUERY POWER ON LEVEL QUERY SYSTEM FAILURE LEVEL QUERY FADE TIME/FADE RATE QUERY SCENE LEVEL (0-15) QUERY GROUPS (0-7) QUERY GROUPS (8-15) QUERY RANDOM ADDRESS H QUERY RANDOM ADDRESS M QUERY RANDOM ADDRESS L IOTLIGHT - User Manual 2AMDI511VPVRDBS...
  • Page 11 In order to activate this mode of control/operation it is necessary to install the IoT Light App on the Android or iOS device that you want to use for the 2AMDI511VPVRDBS dimmer control and disconnect any 0-10V (1-10V) inputs or potentiometer connected to the dimmer.
  • Page 12 IoT Light application. As an alternative you can download the app by clicking on one of two links below: Apple: https://itunes.apple.com/app/iot-light/id1233209834?mt=8 Android: https://play.google.com/store/apps/details?id=com.newlablight.iotlight Manual update 30/11/2017 IOTLIGHT - User Manual 2AMDI511VPVRDBS...

  • Page 13: Parameters Configuration

    OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF Fade Configuration Fade Off OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF Fade On OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF IOTLIGHT - User Manual 2AMDI511VPVRDBS...