Table of Contents
Advertisement
Operating the appliance
en
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
The childproof lock can only be set if the
Note:
appliance is switched off. Some displays also remain
visible in the display when the appliance has been
switched off.
Switch off your appliance when it is not being used. If
no settings are applied for a long time, the appliance
switches itself off automatically.
Switching on the appliance
Turn the function selector to switch on the appliance.
A standard value is highlighted in the display. The
appliance is ready to use.
You can find out how to select the operating modes in
the individual chapters.
Switching off the appliance
Turn the function selector to the off position.
Any functions that may be running are cancelled.
The time appears in the display.
You can set whether the clock should be
Note:
displayed when the device is switched off in the basic
settings.
Selecting an operating mode
After selecting an operating mode, default values are
shown in the display. You can start this setting
immediately.
The following always applies:
Use the function selector to select the operating
1.
mode.
If necessary, apply other settings.
2.
To do this, touch the appropriate field and use the
rotary selector to change the value.
Touch u.
3.
The appliance starts the operation. The u LED
lights up.
16
Setting the heating function and temperature
Example: Hot air 3 at 200 °C
Use the function selector to set the Hot air 3
1.
heating function.
A default temperature of 160 °C will appear on the
display.
Use the rotary selector to set the temperature to
2.
200 °C.
Touch the u button.
3.
The appliance will start heating. The u LED will be lit.
The length of the bar on the temperature indicator
gradually increases.
You can change the temperature at any time when the
appliance is heating using the rotary selector.
Notes
Once the appliance has heated up, slight
■
fluctuations in temperature are normal, depending
on the heating function.
When the appliance is heating, the temperature
■
cannot be set to 40 °C.
Setting the cooking time
Set the type of heating and temperature.
1.
Touch 0 until the x symbol is highlighted.
2.
Use the rotary selector to set the required cooking
3.
time.
Touch u.
4.
The appliance begins to heat up. The u LED lights
up. The cooking time starts counting down.
Pausing the operation
Touch the u field or open the appliance door.
1.
The operation is suspended and the u LED
flashes.
Close the appliance door.
2.
Touch the u field.
3.
The operation is continued and the u LED lights
up.
Advertisement
Table of Contents
