MKC eNetIO-2-ac Quick Manual

eNetIO-2-ac
This short manual provides the most important
information on operating the eNetIO in a compact
form. You can find more detailed
descriptions
www.enetio.de/downloads
in the technical manual and in the
system setup instructions.

Assembly

Before commissioning the eNetIO, ensure that it is
securely standing or fastened. The position of the
device can be freely selected. The eNetIO can be
mounted on a top-hat rail according to EN 60715.
Any control and supply cables used must be fastened
to the screw terminals provided for this purpose
using a screwdriver (PZ2) before operation.
When installing the network cable, make sure that
the plug locks into the socket.
You can find more information about
our products and services at
www.mkc-gmbh.de
08/2023
on our homepage

Package content

1 x eNetIO-2-ac
1 x Magnet
1 x Quickguide

Safety notification

Please read and follow the safety instructions below
when using the appliance.
We cannot guarantee that accidents or damage will
not occur due to improper use of the appliance.
Please use this product with care and at your own
risk.
at
Quickguide