Jasco 45631 User Manual

Wireless Lighting Control
Keypad Controller
Model 45631
User's manual
This device provides control of 4 groups and 4 scenes. Up to 32 Z-Wave devices can be included in each
of the groups and scenes. It is a secondary controller only and cannot function as a primary controller.
BUTTON LAYOUT
Turns selected
group or scene
Press & Release to
change to Group
mode
After entering
SETUP mode, use
to add devices to
a group or scene
NOTE: This product can be operated in one Z-Wave network with Z-Wave certified devices from other
manufacturers and/or other applications. The different listening nodes within the network may act as
repeaters regardless of vendor.
For best results, please read and perform all the remaining instructions before using the controller. Keep
this manual for future reference.
Z-WAVE TERMINOLOGY
Primary Controller: This is the main device used to set up and control your Z-Wave network. There can
only be one primary controller and it must be used to add or delete devices. A primary controller can be a
portable device like a hand-held remote, a static controller (permanently installed & never moved), a
Z-Wave enabled PC or a Z-Wave enabled Ethernet router/bridge/gateway.
pg. 1
Multi-color LED
( (behind
Green/Orange/Red)
bezel). Visible only when
the device is in setup mode
Amber LEDs behind
buttons provide visual
feedback
Turns selected
group or scene
Press & Release to
change to Scene
mode
After entering
SETUP mode, use
to remove
devices from a
group or scene