Table of Contents
Advertisement
Quick Links
Strato Pi UPS Quick Reference
July 2021
Revision 027
SPBU30X Strato Pi UPS board
SPMU30X Strato Pi UPS server with Raspberry Pi 3 Model B
SPMU30XP Strato Pi UPS server with Raspberry Pi 3 Model B+
SPMU30X41 Strato Pi UPS server with Raspberry Pi 4 Model B 1GB
SPMU30X42 Strato Pi UPS server with Raspberry Pi 4 Model B 2GB
SPMU30X44 Strato Pi UPS server with Raspberry Pi 4 Model B 4GB
SPMU30X48 Strato Pi UPS server with Raspberry Pi 4 Model B 8GB
Be sure to always remove the power supply before connecting or
disconnecting the Strato Pi UPS board to Raspberry Pi.
Follow all applicable electrical safety standards, guidelines, specifications
and regulations for installation, wiring and operations of Strato Pi UPS.
Carefully and fully read the Strato Pi UPS user guide before installation.
Strato Pi UPS is not authorised for use in safety-critical applications where a failure of the
product would reasonably be expected to cause personal injury or death. Safety-critical
applications include, without limitation, life support devices and systems, equipment or
systems for the operation of nuclear facilities and weapons systems. Strato Pi UPS is
neither designed nor intended for use in critical military or aerospace applications or
environments and for automotive applications or environment. Customer acknowledges
and agrees that any such use of Strato Pi UPS is solely at Customer's risk, and that
Customer is solely responsible for compliance with all legal and regulatory requirements in
Sfera Labs S.r.l. may make changes to specifications and product descriptions at any time,
without notice. The product information on the website or materials is subject to change
Strato and Sfera Labs are trademarks of Sfera Labs S.r.l. Other brands and names may be
Copyright © 2015-2021 Sfera Labs S.r.l. All rights reserved.
connection with such use.
without notice.
claimed as the property of others.
http://www.sferalabs.cc
Page
1
of
8
Advertisement
Table of Contents
Related Manuals for STRATO SPMU30X
Summary of Contents for STRATO SPMU30X
- Page 1 Customer acknowledges and agrees that any such use of Strato Pi UPS is solely at Customer's risk, and that Customer is solely responsible for compliance with all legal and regulatory requirements in connection with such use.
- Page 2 Safety information Carefully and fully read the user guide before installation and retain it for future reference. Qualified personnel The product described in this manual must be operated only by personnel qualified for the specific task and installation environment, in accordance with all relevant documentation and safety instructions.
- Page 3 Safety instructions General safety instructions Protect the unit against moisture, dirt and any kind of damage during transport, storage and operation. Do not operate the unit outside the specified technical data. Never open the housing. If not otherwise specified, install in closed housing (e.g. distribution cabinet).
- Page 4 WARNING Improper handling of lithium and lead-acid batteries can result in an explosion of the batteries and/or release of harmful substances. Worn-out or defective batteries can compromise the function of this product. Replace the RTC lithium battery before it is completely discharged. The lithium battery must be replaced only with an identical battery.
- Page 5 Strato Pi UPS contains a small non rechargeable manganese dioxide lithium coin battery. In the Strato Pi UPS server, the battery is not accessible from the outside. You should first remove the case top body to gain access to the Strato Pi UPS circuit board. Always remove the battery before disposing of this product.
- Page 6 Installation and use restrictions Standards and regulations The design and the setting up of electrical systems must be performed according to the relevant standards, guidelines, specifications and regulations of the relevant country. The installation, configuration and programming of the devices must be carried out by trained personnel.
- Page 7 AC:2012 - Emission for residential, commercial and light-industrial environments. Compliance information for Raspberry Pi Strato Pi UPS model SPMU30X contains a standard Raspberry Pi 3 Model B single board computer. Strato Pi UPS model SPMU30XP contains a standard Raspberry Pi 3 Model B+ single board computer.
- Page 8 Raspberry Pi 3 Model B, Raspberry Pi 3 Model B+ and Raspberry Pi 4 Model B are in conformity with the essential requirements and other relevant requirements of the Radio Equipment Directive 2014/53/EU. Raspberry Pi 3 Model B FCC IDENTIFIER: 2ABCB-RPI32 Raspberry Pi 3 Model B+ FCC IDENTIFIER: 2ABCB-RPI3BP Raspberry Pi 4 Model B FCC IDENTIFIER: 2ABCB-RPI4B The antenna(s) used for this transmitter must be installed to provide a separation distance...
Need help?
Do you have a question about the SPMU30X and is the answer not in the manual?
Questions and answers