Advertisement
Electric single burner
Electric double burner Model: NHP-903
DO READ THESE INSTRUCTIONS BEFORE USING YOUR ELECTRIC BURNER
AND RETAIN THEM FOR FUTURE REFERENCE, A LWAYS FOLLOW
THEM CAREFULLY.
1. PREPARATION FOR USE
First check that the voltage marked on the product corresponds with your supply
voltage.
2. OPERATION MANUAL
Select a suitable position close to an electric socket (refer to section 4-Safety in USA)
and put the products.
Having suitably positioned the appliance ensure the controls are in the OFF
position.Then inset the plug
Turn on the control,now the products are working.
When using the cooking plate for the first time, the invisible protective coating may still
not be removed. It may or may not be have some smoke, but it is normal reaction.
Avoid foreign articles such as water, food on the heating element during switch on.
Turn off the controls and store the products well.
3. HINTS AND TIPS
Always use flat-bottomed saucepans/containers which make good contact with the
electric stove.
The electric burner have a range of temperatures. Use the lower heat settings (OFF to
3) for simmering and gentle heating and the high settings 4 to MAX for boiling.
Due to the electric burner construction, a certain amount of residual heat will remain
after switching off. This may be used to keep some foods warm for a short period-eg dry
off rice or potatoes.
4. SAFETY IN USE
Choose a position convenient to an electrical socket but away from sources of water.
The work surface must be heat resistant, dry and approximately 30 (75cm ) high.
A gap of at least 2 (5cm ) must be left around the sides of the appliance, since the
sides of the appliance may become hot during use.
The mains cable must not be permitted to touch any part of the appliance and must be
kept out of the reach of children.
Do ensure this appliance is positioned away from the edge of work surfaces and out of
the reach of children and people in sensitive to heat.
This appliance must not be positioned beneath cupboards.
Do not attempt to move cooking plate until completely cooled down nor whilst pan(s)
are stood on them.
Ensure pans are situated centrally on the electric burner and pan handles are safely
positioned.
Care must be taken when using oil or fat for cooking. Do ensure overheating does not
occur, by maintaining close supervision at all times.
Once the cooking is over, turn the switch to OFF position.
Model: NHP-902
120V~60Hz
1000W
120V~60Hz
1440W
Advertisement
